Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FLUXO P125
- Product Code
- 200000016019
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- ACPR-601W-1G1A-JJ92
Identified Uses
Reserved for industrial and professional use.
Uses advised against
Not known.
Manufacturers & Suppliers
Lincoln Electric Europe S.L.
Calle Balmes, 89 8th floor, 2a Barcelona 08008 Spain
+34 93 492 20 00
Lincoln Electric Europe B.V.
Nieuwe Dukenburgseweg 20 Nijmegen 6534AD The Netherlands
+31 243 522 911
Emergency Contacts
USA/Canada/Mexico
+1 (888) 609-1762
Americas/Europe
+1 (216) 383-8962
Asia Pacific
+1 (216) 383-8966
Middle East/Africa
+1 (216) 383-8969
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated light EC: 265-149-8 | 64742-47-8 | 50 - 100% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 10 - 20% | Yes |
| Butane EC: 203-448-7 | 106-97-8 | 10 - 20% | Yes |
| Alcohols, secondary C11-15, ethoxylated | 68131-40-8 | 5 - 10% | Yes |
| (2-methoxymethylethoxy)propanol EC: 252-104-2 | 34590-94-8 | 5 - 10% | No |
Notes
The term “Hazardous Ingredients” should be interpreted as a term defined in Hazard Communication standards and does not necessarily imply the existence of a welding or allied process hazard. The product may contain additional non-hazardous ingredients or may form additional compounds under the condition of use. Refer to Sections 2 and 8 for more information.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air if breathing is difficult. If breathing has stopped, perform artificial respiration and obtain medical assistance at once.
Remove contaminated clothing and wash the skin thoroughly with soap and water.
Symptoms: reddened or blistered skin, thermal burns
Do not rub eye. Any material that contacts the eye should be washed out immediately with water. If easy to do, remove contact lenses. Continue to rinse for at least 15 minutes.
Rinse mouth thoroughly.
Immediate Medical Attention
Obtain medical assistance at once if breathing has stopped (inhalation), or for reddened or blistered skin/thermal burns (skin contact). Get medical attention promptly if symptoms occur after washing (eye contact).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Use standard firefighting procedures and consider the hazards of other involved materials.
Firefighter Protection
Selection of respiratory protection for fire fighting: follow the general fire precautions indicated in the workplace. Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to recommendations in
Avoid release to the environment.
Absorb with sand or other inert absorbent. Clean up spills immediately, observing precautions in the personal protective equipment in Section 8.
Materials: sand or other inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices.
Store in closed original container in a dry place. Store in accordance with including any local/regional/national regulations.
Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Observe Occupational Exposure Limits and minimize the risk of inhalation.
Wear protective gloves. Suitable gloves can be recommended by the glove supplier.
Wear goggles/face shield.
In case of inadequate ventilation use suitable respirator. Seek advice from local supervisor.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
None under normal conditions.
Avoid heat or contamination.
Strong acids. Strong oxidizing substances. Strong bases.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FLUXO P125?
The signal word is danger.
What is the physical form of FLUXO P125?
FLUXO P125 is a gas appearing as no data available. with no data available. color. It has no data available. odor.
What is FLUXO P125 used for?
Reserved for industrial and professional use.
What are the hazard statements for FLUXO P125?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst if heated.
- H318: Causes serious eye damage.