NextSDS Logo
Safety Data Sheet EN

FLUXO P125

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FLUXO P125

Regulatory Identifiers

CAS Number
N/A
UFI Code
F030-D012-G00X-AMP4

Identified Uses

Product for NON DESTRUCTIVE TESTING - Reserved for professional users

Manufacturers & Suppliers

SREM TECHNOLOGIES logo

SREM TECHNOLOGIES

manufacturer

14 Rue des Frères Chappe 72230 LA FLECHE FRANCE

+33 (0)2 43 48 15 10

http://www.srem.fr

Emergency Contacts

INRS / ORFILA

+33 (0)1 45 42 59 59

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304
Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Not Classified

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P264 Wash with plenty of water thoroughly after handling
P280 Wear protective gloves/protective clothing/eye protection/ ...
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/...
P302 + P352 IF ON SKIN: Wash with plenty of water/...
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P331 Do NOT induce vomiting.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
HYDROCARBONS, C11-C14, N-ALNANES, ISOALKANES, CYCLICS, <2% AROMATICS EC: 926-141-6 --- 50 - 100% Yes
ALCOHOLS C11 - C15 SECONDARY ETHOXYLATED EC: 614-295-4 68131-40-8 5 - 20% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Skin contact

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Watch out for any remaining product between skin and clothing, watches, shoes, etc.

Symptoms: allergic reaction

Eye contact

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.

Symptoms: redness, pain or visual impairment

Ingestion

Do not give the patient anything orally. In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor. If swallowed accidentally, do not allow to drink, do not induce vomiting and transfer to hospital immediately by ambulance.

Immediate Medical Attention

Regardless of the initial state, refer the patient to an ophthalmologist and show him the label. If there is any redness, pain or visual impairment, consult an ophthalmologist. In the event of an allergic reaction, seek medical attention. Seek medical attention immediately, showing the label. If swallowed accidentally, do not allow to drink, do not induce vomiting and transfer to hospital immediately by ambulance. Show the label to the doctor.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Specific hazards

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.

Instructions

Do not breathe in smoke.

Firefighter Protection

Fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

For non first aid worker Avoid any contact with the skin and eyes. For first aid worker First aid workers will be equipped with suitable personal protective equipment (See section 8).

Environmental

Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal.

Cleanup methods

Retrieve the product by mechanical means (sweeping/vacuuming).

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Always wash hands after handling. Remove and wash contaminated clothing before re-using. Never inhale this mixture. Prevent access by unauthorised personnel. Avoid eye contact with this mixture at all times.

Storage

Keep away from food and drink, including those for animals.

Hygiene

Always wash hands after handling. Remove and wash contaminated clothing before re-using. No smoking, eating or drinking in areas where the mixture is used.

Fire prevention

Never inhale this mixture. Prevent access by unauthorised personnel.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure that there is adequate ventilation, especially in confined areas.

Hands

Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required.

Eyes

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes. Before handling, wear safety goggles with protective sides accordance with standard EN166. In the event of high danger, protect the face with a face shield. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166. Prescription glasses are not considered as protection. Individuals wearing contact lenses should wear prescription glasses during work where they may be exposed to irritant vapours. Provide eyewash stations in facilities where the product is handled constantly.

Respiratory

Avoid inhaling dust. Type of FFP mask : Wear a disposable half-mask dust filter in accordance with standard EN149/A1.

Skin/Body

Avoid skin contact. Wear suitable protective clothing. Suitable type of protective clothing : In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with EN14605/A1 to prevent skin contact. Wear protective clothing against solid chemicals and particles suspended in the air (type 5) in accordance with standard EN13982-1/A1 to prevent skin contact. In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034/A1 to prevent skin contact. Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
---
Properties Status
---
Solubility In Water
---
Relative Evaporation Rate
---
Solubility In Fat
---
Physical State
Liquid
Odor
---
Evaporation Rate
---
Softening Point
---
Auto Ignition Temperature
>230°C
Freezing Point
---
Upper Explosive Limit
9.5%
Colour
Red
Density
0.85
Physical State Data
liquid
Boiling Point
>200°C
Bulk Density
---
Partition Coefficient
---
Crystallisation Point
---
Solidification Point
---
Cloud Point
---
Explosive Limits
---
Odor Threshold
---
Form
---
Appearance
---
Vapor Density
---
Colour Intensity
---
Flash Point
>80°C
Melting Point
---
Kinematic Viscosity
---
Vapor Pressure
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
State Under Standard Conditions
---
Decomposition Temperature
---
Solubility
---
Dynamic Viscosity
---
Ph
---
Flammability
---
Lower Explosive Limit
1.8%
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This mixture is stable under the recommended handling and storage conditions in section 7.

Reactivity

No data available.

Hazardous reactions

No data available.

Avoid

Any apparatus likely to produce a flame or to have a metallic surface at high temperature (burners, electric arcs, furnaces etc.) must not be allowed on the premises. Avoid : - heating - heat - formation of dusts. Dusts can form an explosive mixture with air.

Incompatible

No data available.

Decomposition

carbon monoxide (CO) carbon dioxide (CO2)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FLUXO P125?

The signal word is danger.

What is the physical form of FLUXO P125?

FLUXO P125 is a liquid with red color.

What is FLUXO P125 used for?

Product for NON DESTRUCTIVE TESTING - Reserved for professional users

What are the hazard statements for FLUXO P125?

This substance has 3 hazard statements:

  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.