FLUXO P125

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Watch out for any remaining product between skin and clothing, watches, shoes, etc.

Symptoms: allergic reaction

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.

Symptoms: redness, pain or visual impairment

In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water. If swallowed accidentally, transfer to hospital immediately by ambulance.

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health. Do not breathe in smoke.

Consult the safety measures listed under headings 7 and 8.

Prevent any material from entering drains or waterways.

Retrieve the product by mechanical means (sweeping/vacuuming).

Always wash hands after handling. Remove and wash contaminated clothing before re-using. Never inhale this mixture. Prevent access by unauthorised personnel. Avoid eye contact with this mixture at all times.

Always wash hands after handling. Remove and wash contaminated clothing before re-using. No smoking, eating or drinking in areas where the mixture is used.

Never inhale this mixture.

Ensure that there is adequate ventilation, especially in confined areas.

Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required.

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes. Before handling, wear safety goggles with protective sides accordance with standard EN166. In the event of high danger, protect the face with a face shield. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166. Prescription glasses are not considered as protection. Individuals wearing contact lenses should wear prescription glasses during work where they may be exposed to irritant vapours. Provide eyewash stations in facilities where the product is handled constantly.

Avoid inhaling dust. Type of FFP mask : Wear a disposable half-mask dust filter in accordance with standard EN149/A1.

Avoid skin contact. Wear suitable protective clothing. Suitable type of protective clothing : In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with EN14605/A1 to prevent skin contact. Wear protective clothing against solid chemicals and particles suspended in the air (type 5) in accordance with standard EN13982-1/A1 to prevent skin contact. In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034/A1 to prevent skin contact. Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.

This mixture is stable under the recommended handling and storage conditions in section 7.

No data available.

No data available.

Any apparatus likely to produce a flame or to have a metallic surface at high temperature (burners, electric arcs, furnaces etc.) must not be allowed on the premises. Avoid: heating, heat, formation of dusts. Dusts can form an explosive mixture with air.

No data available.

The thermal decomposition may release/form : - carbon monoxide (CO) carbon dioxide (CO2)