Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CRL FLOCCULANT 7418
- Product Code
- 5993
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Mixture
Identified Uses
PC20 Processing aids such as pH-regulators, flocculants, precipitants, neutralization agents. Application of the substance / the mixture: Flocculant/ Flocculating agent
Uses advised against
Any use carrying a risk of direct contact with eyes/skin where workers are exposed without adequate personal protective equipment (PPE). Any use involving significant release of aerosol, vapour or dust in the breathing zone of workers where they are exposed without suitable respiratory protective equipment (RPE). Processes involving extreme heat use advised against. Processes involving the use of incompatible substances - refer to section 10.
Manufacturers & Suppliers
C.R. Laurence of Europe
manufacturer
Charles Babbage Avenue, Kingsway Business Park, Rochdale, OL16 4NW
+44 (0) 1706 863600
Emergency Contacts
NHS
111
NHS 24
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution of the subtance(s) listed below.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Reaction mass of aluminium nitrate and aluminium sulphate EC: 914-919-8 | --- | 25 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Check for and remove any contact lenses. Rinse opened eye for several minutes under running water. Then consult a doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately. If vomiting occurs spontaneously, keep head below hips to prevent aspiration.
Immediate Medical Attention
Call for medical help immediately.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray. Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet
Do not allow the product to dry out. After drying, the residue is spontaneously flammable.
Absorb gas/vapours with water spray. Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Particular danger of slipping on leaked/spilled product.
Do not allow to penetrate the ground/soil. Do not allow to enter sewers/ surface or ground water.
Contain and collect spillage and place in container for disposal according to local regulations. Wash the area with plenty of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Avoid direct contact (skin/eye contact, ingestion and/or inhalation of fume/mist/dust) with the product in the undiluted form. Safety showers and eye wash facilities should be available at the work area. Rinse contaminated clothing with plenty of water (Fire hazard)
Protect from heat. Do not allow the product to dry out.
Rinse contaminated clothing with plenty of water.
Protect from heat. Do not allow the product to dry out.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Use gloves tested and approved under appropriate government standards such as NIOSH (US) or EN374 (EU). The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR. Neoprene gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Goggles recommended during refilling.
Use suitable respiratory protective device only when aerosol or mist is formed.
Impervious protective clothing. Body protection must be chosen depending on product properties, activity and possible exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
Do not allow the product to dry out. After drying, the residue is spontaneously flammable.
No dangerous reactions known.
Heat and static discharge.
Strong bases.
Carbon monoxide and carbon dioxide Nitrogen oxides (NOx) Sulphur oxides (SOx) Toxic metal oxide smoke
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (Reaction mass of aluminium nitrate and aluminium sulphate)
- Transport Class
- 8
- Packing Group
- III
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CRL FLOCCULANT 7418?
The signal word is danger.
What is the physical form of CRL FLOCCULANT 7418?
CRL FLOCCULANT 7418 is a liquid with colourless color. It has odourless odor.
What is CRL FLOCCULANT 7418 used for?
PC20 Processing aids such as pH-regulators, flocculants, precipitants, neutralization agents. Application of the substance / the mixture: Flocculant/ Flocculating agent
What are the hazard statements for CRL FLOCCULANT 7418?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H318: Causes serious eye damage.
What is the melting point of CRL FLOCCULANT 7418?
The melting point is -11 °C and the boiling point is 100 °C.