Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FloPlast SOLVENT CEMENT
- Product Code
- SC125 – SC250
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
ADHESIVE
Manufacturers & Suppliers
FloPlast LTD
distributor
CASTLE ROAD, EUROLINK BUSINESS PARK, SITTINGBOURNE, KENT, ME10 3FP
01795 431731
BISON INTERNATIONAL BV
manufacturer
NL-4462 EW Goes, PO BOX 160, NL-4462 AD Goes, NETHERLANDS
Emergency Contacts
Emergency Contact
01795 431731
Mon – Fri 08:00HRS – 17:00HRS
Emergency Contact
+31 88 3235700
Mon – Fri 07:00hrs – 17:00hrs (CET)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Butanone EC: 201-159-0 | 78-93-3 | 50 - 100% | Yes |
For wording of the listed hazards phrases refer to Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints. No special measures required.
Generally, the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water haze, Alcohol resistant foam, Fire-extinguishing powder, Carbon dioxide.
Water with full jet.
Cool endangered receptacles with water spray.
Firefighter Protection
Protective equipment: No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good interior ventilation, especially at floor level. (Fumes are heavier than air). Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Keep container tightly sealed. Store in cool, dry conditions in well-sealed receptacles.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Solvent resistant gloves. The glove material must be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Recommended thickness of material: > 0.12 mm, Butyl rubber, BR, Nitrile rubber, NBR, Recommended thickness of material: > 0.7 mm. Penetration time of glove material: For the mixture of chemicals mentioned below the penetration time must be at least 10 minutes (Permeation according to EN 374 Part 3: Level 1), For the mixture of chemicals mentioned below the penetration time must be at least 120 minutes (Permeation according to EN 374 Part 3: Level 4)
Tightly sealed goggles recommended during refilling.
Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Filter A
Solvent resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
Danger of forming toxic pyrolysis products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 TOXICITY
No further relevant information available.
12.1 Toxicity
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.3 Bio-accumulative potential
No further relevant information available.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Endocrine disrupting properties
Information on endocrine disrupting properties is referenced in section 11.
12.7 Other adverse effects
The product is classified as slightly hazardous for water (Water hazard class 1, German Regulations). Precautions should be taken to prevent undiluted product or large quantities from entering the environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be made according to official regulations.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Shipping Name
- ADHESIVES
- Transport Class
- 3
- Packing Group
- III
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FloPlast SOLVENT CEMENT?
The signal word is danger.
What is the physical form of FloPlast SOLVENT CEMENT?
FloPlast SOLVENT CEMENT is a fluid appearing as fluid with according to product specification color. It has characteristic odor.
What is FloPlast SOLVENT CEMENT used for?
ADHESIVE
What are the hazard statements for FloPlast SOLVENT CEMENT?
This substance has 3 hazard statements:
- H225: Highly flammable liquid vapour.
- H319: Cause serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of FloPlast SOLVENT CEMENT?
The melting point is Undetermined. and the boiling point is 79 – 80.5°C..