Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CUR-FS 001 Flushing Solution
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Flushing solution
Manufacturers & Suppliers
Agfa-Gevaert NV
manufacturer
Prins Boudewijnlaan 5, 2550 Kontich, Belgium
+32 3 4509717
Emergency Contacts
Emergency Contact
+32 3 4443333
24h/24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product does not contain any hazardous ingredients as defined by relevant legislation.
First Aid Measures
Emergency procedures for chemical exposure incidents
Not relevant.
Wash immediately with plenty of water and soap.
Rinse thoroughly with plenty of water for at least 15 minutes.
Immediate Medical Attention
Consult a physician (eye contact); seek medical advice if symptoms persist (skin contact); obtain medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry extinguishing powder., Dry sand., Alcohol-resistant foam., Carbon dioxide (CO2).
Do not use a solid water stream as it may scatter and spread fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Collect large spills into a properly labelled and sealable container.
For waste disposal see section 13.
Soak up with absorbent material.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition.
Keep container tightly closed. Protect from direct sunlight.
Keep away from heat and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation should be sufficient so that any applicable occupational exposure limits are not exceeded.
Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact use gloves made of the materials: butyl rubber (thickness >= 0.36 mm, breakthrough time > 480 min), nitrile rubber (thickness >= 0.38 mm, breakthrough time > 480 min) or neoprene (thickness >= 0.65 mm, breakthrough time > 240 min). For intermittent splash protection corresponding gloves with breakthrough times > 60 min can be used. Avoid gloves made of: natural latex.
Safety glasses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under normal conditions of storage and use.
Avoid contact with strong oxidizing agents.
strong oxidizing agents
Carbon dioxide (CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The substance is not classified as hazardous to the environment.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste treatment and disposal conditions of chemicals and their packaging may vary from one country to another.
Contact an authorized waste contractor.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product is not to be labelled as a dangerous substance or preparation as defined by EC Directives and transposed into national legislation.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CUR-FS 001 Flushing Solution?
The signal word is no signal word.
What is the physical form of CUR-FS 001 Flushing Solution?
CUR-FS 001 Flushing Solution is a liquid. with colourless. color. It has smell of esters odor.
What is CUR-FS 001 Flushing Solution used for?
Flushing solution
What is the melting point of CUR-FS 001 Flushing Solution?
The melting point is -75 °C and the boiling point is 229 °C.