NextSDS Logo
Safety Data Sheet EN

DOMOPOL 5144 60%

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DOMOPOL 5144 60%
Product Code
VZ228

Regulatory Identifiers

CAS Number
N/A

Emergency Contacts

HSE dept.

+386 (1) 722 4383

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Flam. Liq. Cat. 3 H226
Acute Tox. Cat. 4 H312

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Flammable liquid and vapour.
H312 Harmful in contact with skin.
H315 Causes skin irritation.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P370 + P378 In case of fire: use powder, foam or CO2 for extinction.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Solution of saturated polyester resin in organic solvents.

Chemical Name CAS Number Concentration Hazardous
xylene EC: 215-535-7 1330-20-7 10 - 25% Yes
2-butoxyethyl acetate EC: 203-933-3 112-07-2 10 - 25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Take victim to clean air, put it in position to rest. In the case of respiratory problems provide artificial respiration. If dizziness, headache and nausea appear, take victim to the hospital - in the lateral position and maintain clear airway pathways.

Symptoms: dizziness, headache and nausea

Skin contact

Remove contaminated clothing. Wash skin with soap and water. Do not use organic solvents or thinners.

Eye contact

Flush eyes with water to removeproduct residue.

Ingestion

Do not eat. Rinse mouth with water. Do not induce vomiting.

Immediate Medical Attention

If dizziness, headache and nausea appear, take victim to the hospital.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, powder, carbon dioxide, inert gas or INERGEN FM 200 (started phase fire fighting), water fog.

Unsuitable media

Water jet, unless USED ONLY for water mist to cool containers with flammable products. Open water jet

Specific hazards

The possibility of formation man harmful gases and thick smoke during the fire.

Instructions

Remove all possible sources of ignition: open flame, lit cigarette, sparkling of tools and equipment. Close packagings with product.

Firefighter Protection

The use of protective mask with filter A is mandatory.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent leakage into water, water dams, cellars, caves or sewage system.

Cleanup methods

Absorb the outflown product and mix it with soil, sand or other absorptive materials for liquids.

Materials: soil, sand or other absorptive materials

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not smoke, drink or eat while handling the product. Do not breathe vapors, avoid contact with skin and eyes. At work wear cotton overalls or coveralls, nitrile rubber gloves and safety glasses with side shields.

Storage

Store in tightly closed vessels in a cool and ventilated room. Store in an upright position.

Hygiene

Do not smoke, drink or eat while handling the product.

Fire prevention

At the use product vapours may produce flammable/explosive mixtures of vapours and air. During the pumping static electrification may occur. Emptying of static electrification, which could cause fire. At the decanting of larger quantities assure conductivity with binding and earthing of complete equipment. Prevent contact with hot objects, sparkles, flame and sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

At several contacts with the product use gloves made of nytril rubber with thickness 0,40 mm, in contact with drops of product (minor contacts) the gloves made of nytril rubber of thickness 0,11 mm.

Eyes

Not needed.

Respiratory

When used in confined spaces, prolonged work, wear protective mask for the whole face with filter "A". In case that the oxygen concentration in the air of work room falls under 17 %, use independent respirator with an open circle on the compressed air.

Skin/Body

In normal conditions wear clothes made of cotton and suitable footwear. In case the possibility of outflow is high, use the clothes and footwear resistant to chemicals(PVC,rubber).

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
139 °C;xylene;computational method,based on component data
Auto Ignition Temperature
280 °C; 2-butoxyethyl acetate ; computational method, based on component data
Vapor Density
---
Colour
Colorless topaleyellow
Upper Explosive Limit
8,40;computational method,based on component data
Bulk Density
---
Physical State
Liquid
Metal Corrosion
---
Voc Content
0,4000
Solubility In Water
Insoluble
Relative Density
---
Flammability
---
Molecular Weight
---
Kinematic Viscosity
>21 mm²/s, 40°C
Explosive Limits
---
Crystallisation Point
---
Dynamic Viscosity
DIN 53019 23°C 1.000 - 4.500 mPas
Decomposition Temperature
---
Vapor Pressure
1.000 xylene
Form
Liquid
State Under Standard Conditions
---
Odor
Specific for organic solvents
Partition Coefficient
---
Physical State Data
liquid
Softening Point
---
Lower Explosive Limit
1,10
Flash Point
38(°C);ISO 3679:2004,closed cup
Solubility
---
Properties Status
---
Evaporation Rate
---
Solidification Point
---
Density
1,07 ISO 2811
Solubility In Fat
---
Odor Threshold
---
Colour Intensity
---
Relative Evaporation Rate
---
Freezing Point
---
Appearance
---
Melting Point
---
Ph
N.A.
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under conditions in accordance with the instructions and proper storage.

Reactivity

Stable - when used in accordance with the instructions.

Avoid

The presence of open flame or hazardous materials. Avoid contact of product with heat, sparks, flames and other ignition sources.

Incompatible

The product is non-reactive and compatible with majority of substances, except with extreme oxidants. Keep the product in the original packaging. Do not mix with other products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The product leftovers, waste and useless packaging should be handled in accordance with the Regulations on processing of special and dangerous waste (dir. 91/689/EEC, dir. 2000/532/EC).

Disposal

The recommended degradation method is the use of the controlled high temperature incineration or disposal to the deposits for dangerous substances.

Waste Codes

08 01 11 Waste classification number EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1866
Shipping Name
RESIN SOLUTION, flammable(640 E)
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

This Safety Data Sheet has been prepared in accordance with a comprehensive chemicals legislation - REACH Regulation on chemicals and the Regulation for classification, labeling and packaging (CLP/GHS).

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DOMOPOL 5144 60%?

The signal word is warning.

What is the physical form of DOMOPOL 5144 60%?

DOMOPOL 5144 60% is a liquid with colorless topaleyellow color. It has specific for organic solvents odor.

What are the hazard statements for DOMOPOL 5144 60%?

This substance has 3 hazard statements:

  • H226: Flammable liquid and vapour.
  • H312: Harmful in contact with skin.
  • H315: Causes skin irritation.