WorléeCryl VP-A 3554/15, 40% in water

Remove the casualty into fresh air and keep at rest.

Take off immediately all contaminated clothing. Wash contaminated clothing before reusing. Do not allow the product to dry on the skin. Wash skin thoroughly with soap and water or use recognised skin cleanser.

Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Begin with medical treatment.

If swallowed, rinse mouth with water (only if the person is conscious). Do not induce vomiting unless directed to do so by medical personnel. Seek medical attention.

Extinguishing measures to suit surroundings. In case of fire, use water spray jet, dry extinguishing powder, foam or carbon dioxide.

water jet.

Fire will produce dense black smoke containing hazardous combustion products.

Use water spray to keep fire-exposed containers cool.

Do not discharge into the drains / surface waters / groundwater. Prevent spread over a wide area e. g. by containment or oil barriers.

Absorb with liquid-binding material (sand, diatomite, universal binders etc.) or use a spill kit.

Materials: spill kit

Provide good ventilation of working area.

Store in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination. Store in accordance with local regulations. Protect from frost.

Wear protective gloves in cases of prolonged contact (DIN EN 374). Protective gloves should in any case be tested for workplace-specific suitability (e.g. mechanical resistance, product compatibility, antistatic properties). Comply with instructions and information provided by the glove manufacturer concerning use, care and replacement of the gloves. Replace protective gloves immediately upon damage or at the first signs of wear. As far as possible, plan work procedures so that wearing gloves will not be necessary. Recommended glove material: Nitrile. Material thickness: >0,4 mm. Permeation time: >480 min.

Safety goggles with lateral shielding (DIN EN 166)

If the occupational exposure limits are exceeded, suitable respiratory protective equipment must be worn. If no occupational exposure limits are defined, sufficiently effective respiratory protective measures must be taken in the presence of aerosols and vapours.

Usual working clothes for the chemical industry, suitable for the job.

The product is stable.

The product is not considered to be reactive.

No hazardous reactions when stored and handled according to prescribed instructions.

Protect from frost. Store away from direct sunlight.

None known.

Thermal disintegration depends to a great extent on the external conditions. A complex mixture of solids, liquids and gases forms in the air, including among other substances carbon dioxide, carbon monoxide and other organic compounds, when this material is burnt or is thermally or oxidatively degraded.