Komelol NB-70

Remove patient to fresh air-move out of dangerous area. If victim has difficulties with breathing or is not breathing give artificial respiration. If symptoms persist, seek medical attention.

Symptoms: Vapours may cause drowsiness and dizziness. Irritating to respiratory system.

Immediately remove contaminated clothing. Areas of the body that have come into contact with the product must be rinsed with water. If feeling unwell seek medical help.

Symptoms: On contact with skin may cause irritation and redness.

Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. If symptoms persist, seek medical attention.

Symptoms: Causes strong irritation: Risk of serious damage to eyes.

Consult a physician. Show the physician the Safety Data Sheet or label. Rinse mouth with water. Do not provoke vomiting, seek medical advice first.

Symptoms: Harmful to health when ingested.

Carbon dioxide. Dry chemical powder. Water spray. Alcohol resistant foam.

Full water jet.

In case of a fire toxic gases can generate; do not inhale gases/smoke.

Cool containers at risk with water spray jet. If possible remove containers from endangered area.

Ensure adequate ventilation. Keep away from sources of ignition; No smoking!

Do not allow product to reach water/drains/sewage systems or permeable soil.

Absorb product (with inert material), collect it in special container and dispose it according to valid regulations on handling with waste.

Materials: inert material

Use good personal hygiene practices-wash hands at breaks and when done working with material. Do not eat, drink or smoke while working. Avoid contact with skin and eyes. Do not breathe vapours/mist.

Keep in cool and well ventilated area. Keep in well closed containers.

Use good personal hygiene practices-wash hands at breaks and when done working with material. Do not eat, drink or smoke while working.

Keep away from sources of ignition - No smoking. Use spark-proof tools. Take precautionary measures against static discharges.

Provide good ventilation and local exhaust in the area with increased concentration.

Use chemical resistant gloves. Follow the manufacturer’s instructions about permeability and penetration times and specific workplace conditions (mechanic load, exposure duration). Recommended material protective values for direct and prolonged contact with the preparation; protection index 6 corresponds to an exposure of eight hours (according to EN 374). Follow the manufacturer’s instructions for use, storage, maintenance and glove changing. In case of damage or at the first signs of wear and tear, change the gloves immediately. Unsuitable material: natural rubber. Appropriate materials: Nitrile (≥ 0,175 mm), Neoprene (0,4 mm), Butyl, Viton (fluorinated rubber), PE.

Tight fitting protective goggles (EN 166).

When there are high concentrations of vapours/aerosols in the air use a mask with a filter A (EN14387). Not needed under normal use and adequate ventilation.

Protection for body must be selected by activity and possible exposure - use protective apron, protective boots, chemical protective clothing. Protective overalls against liquid chemicals (EN 14605).

Product is stable under normal conditions according to handling and storage.

No special precautions required. Consider the directions for use and storage.

Strong oxidizing agents.

Under normal use conditions no hazardous decomposition products expected. In case of fire/explosion vapours dangerous for health are spread.

In case a product is transported in the packaging units smaller than 450 l, it is not classified as dangerous according to ADR/RID, in accordance with the concession 2.2.3.1.5.