Komelol NB-72/US

Remove patient to fresh air - move out of dangerous area. If victim is not breathing give artificial respiration. If symptoms persist, seek medical attention.

Symptoms: Vapours may cause drowsiness and dizziness. Irritating to respiratory system.

Take off all contaminated clothing. Areas of the body that have come into contact with the product must be rinsed with water. If symptoms develop and persist, seek medical attention.

Symptoms: On contact with skin may cause irritation and redness.

Immediately flush eyes with running water, keeping eyelids apart. If symptoms persist, seek medical attention.

Symptoms: Causes strong irritation: Risk of serious damage to eyes.

Consult a physician. Show the physician the safety data sheet or label. Rinse mouth thoroughly with water. Do not induce vomiting without prior consultation with a doctor.

Symptoms: Harmful to health.

Carbon dioxide. Dry chemical powder. Water spray. Alcohol resistant foam.

Full water jet.

In case of a fire toxic gases can be generated; do not inhale gases/smoke.

Cool containers at risk with water spray. If possible remove containers from endangered area.

Ensure adequate ventilation. Keep away from sources of ignition and/or heat; No smoking!

Do not allow product to reach water/drains/sewage systems or permeable soil.

Absorb product (with inert material), collect it in special container and dispose it to a licensed hazardous-waste disposal contractor.

Materials: inert material

Avoid contact with skin and eyes. Do not breathe vapours/mist.

Keep in cool and well ventilated area. Keep in well closed containers. Keep away from food, drink and animal feeding stuffs. Keep away from open fire, heat, sparks and direct sunlight.

Use good personal hygiene practices – wash hands at breaks and when done working with material. Do not eat, drink or smoke while working.

Keep away from sources of ignition - no smoking. Use spark-proof tools. Take precautionary measures against static discharges.

Provide good ventilation and local exhaust in areas with increased concentration.

Use chemical resistant gloves classified according to standard EN 374. Follow the manufacturer’s instructions about permeability and penetration times and specific workplace conditions (mechanic load, exposure duration). Recommended material protective values for direct and prolonged contact with the preparation; protection index 6 corresponds to an exposure of eight hours (according to EN 374). Observe the manufacturer's instructions regarding the use, storage, maintenance and replacement of gloves. In case of damage or at the first signs of wear and tear, change the gloves immediately. Unsuitable material: natural rubber. Appropriate materials: Nitrile (≥ 10,175 mm), Butyl rubber, Viton (fluorinated rubber), PE.

Tight fitting protective goggles (EN 166).

When there are high concentrations of vapours/aerosols in the air use a mask with a filter A (SIST EN 14387:2004 + A1:2008). Not needed under normal use and adequate ventilation.

Protection for body must be selected by activity and possible exposure - use protective apron, protective boots, chemical protective clothing. Protective work clothing resistant to liquid chemicals (EN 14605).

Product is stable under normal conditions of use, recommended handling and storage conditions.

No special precautions required. Consider the directions for use and storage.

Strong oxidising agents.

Under normal use conditions no hazardous decomposition products are expected. In case of fire/explosion vapours/gases that pose a health hazard are released.

In case a product is transported in the packaging units smaller than 450 l, it is not classified as dangerous according to ADR/RID, in accordance with the concession 2.2.3.1.5.