NextSDS Logo
Safety Data Sheet EN

Komelol BG-21

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Komelol BG-21
Product Code
960 019

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Raw material for coatings, Other products

Manufacturers & Suppliers

M

Melamin d.d. Kocevje

manufacturer

Tomsiceva 9, 1330 Kocevje, Slovenia

+386 1 8959300

S

Supplier

+386 1 8959300

Emergency Contacts

Emergency Contact

112

Supplier

+386 1 8959300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

Hazard Classifications

Flam. Liq.
Acute Tox.
Skin Irrit.
Eye Dam.
Skin Sens.
STOT SE

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
n-butanol EC: 200-751-6 71-36-3 30 - 34% Yes
formaldehyde EC: 200-001-8 50-00-0 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove patient to fresh air-move out of dangerous area. If victim has difficulties with breathing or is not breathing give artificial respiration. If symptoms persist, seek medical attention.

Symptoms: Vapours may cause drowsiness and dizziness. Irritating to the airways.

Skin contact

Wash thoroughly with plenty of water and soap! If feeling unwell seek medical help.

Symptoms: May cause sensitisation by skin contact. Irritating to the skin.

Eye contact

Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. If symptoms persist, seek medical attention.

Symptoms: Danger of serious eye injury.

Ingestion

Consult a physician. Show the physician the Safety Data Sheet or label. Rinse mouth with water. Do not provoke vomiting, seek medical advice first.

Symptoms: Harmful if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide. Dry chemical powder. Alcohol or polymer foam.

Unsuitable media

Full water jet.

Specific hazards

In case of a fire toxic gases can generate; do not inhale gases/smoke.

Instructions

Cool containers at risk with water spray jet. If possible remove containers from endangered area.

Firefighter Protection

Complete protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow product to reach water/drains/sewage systems or permeable soil.

Cleanup methods

Absorb product (with inert material), collect it in special container and dispose it according to valid regulations on handling with waste.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use good personal hygiene practices-wash hands at breaks and when done working with material. Do not eat, drink or smoke while working. Avoid contact with skin and eyes. Do not breathe vapours/mist.

Storage

Keep in cool and good ventilated area. Protect from open fire, heat and direct sunlight. Keep in well closed containers.

Hygiene

Use good personal hygiene practices-wash hands at breaks and when done working with material. Do not eat, drink or smoke while working.

Fire prevention

Keep away from sources of ignition - No smoking. Use spark-proof tools. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide good ventilation and local exhaust in the area with increased concentration.

Hands

Protective gloves resistant to solvents.

Eyes

Tight fitting protective goggles.

Respiratory

In case of insufficient ventilation wear suitable respiratory protection. Protective mask with organic vapour filter.

Skin/Body

Working cothes resistant to organic solvents.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless to slightly yellowish
Colour Intensity
---
Form
---
Odor
specific
Odor Threshold
---
Ph
no information
Melting Point
no information
Boiling Point
116 °C ≤ Boiling point/boiling range ≤ 118 °C(butanol)
Flash Point
ca. 46 °C(ASTM D3278)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
= 5.6 hPa at 20 °C(butanol)
Vapor Density
---
Relative Density
ca. 1.04g/cm3
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
1.4 vol % < Explosion limits(vol%) ≤ 11.3 vol %(butanol)
Lower Explosive Limit
1.4 vol % < Explosion limits(vol%) ≤ 11.3 vol %(butanol)
Explosive Limits
---
Auto Ignition Temperature
≥ 345 °C(butanol)
Decomposition Temperature
---
Solubility
Organic solvent: Soluble
Partition Coefficient
no information
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
400 cP ≤ Viscosity ≤ 600 cP at 23 °C(Brookfield)
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Product is stable under normal conditions according to handling and storage.

Avoid

No special precautions required. Consider the directions for use and storage.

Incompatible

Follow the general rule of incompatible chemicals.

Decomposition

Under normal use conditions no hazardous decomposition products expected. In case of fire/explosion vapours dangerous for health are spread.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1866
Shipping Name
RESIN SOLUTION, flammable
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Komelol BG-21?

The signal word is na: r-phrases.

What is the physical form of Komelol BG-21?

Komelol BG-21 is a liquid with colourless to slightly yellowish color. It has specific odor.

What is the solubility of Komelol BG-21?

Organic solvent: Soluble

What is Komelol BG-21 used for?

Raw material for coatings, Other products

What is the melting point of Komelol BG-21?

The melting point is no information and the boiling point is 116 °C ≤ Boiling point/boiling range ≤ 118 °C(butanol).