Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NOVARES LM 1000
- Product Code
- 145540MW
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- R7UA-PEAG-0HEU-X5DT
Identified Uses
Synthetic resin, Raw material for adhesives, sealants, coatings, printing inks and rubbergoods, The uses are specified in the attached document
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Rain Carbon Germany GmbH
manufacturer
Varziner Straße 49 47138 Duisburg
+49203429602
http://www.raincarbon.com
Emergency Contacts
GBK GmbH, Ingelheim
+49 (0)61 32 / 84 463
24-hour
GBK/INFOTRAC
(001) 352 323 3500
24-hour
GBK/INFOTRAC
1 800 535 5053
24-hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
organic
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-unsatd., polymd. | 71302-83-5 | 55% | Yes |
| Phenol, reaction products with divinylbenzene EC: 297-029-6 | 93281-16-4 | 45% | Yes |
EU-REACH regulation (EC 1907/2006):"Hydrocarbons, C9unsaturated, polymerized” (CAS-no. 71302-83-5) is registered as "Naphtha (petroleum), steam-cracked, C8-10 aromatic hydrocarbon fraction, alkylated and oligomerised” (List Number (assigned manually to validated substances from inquiries by ECHA): 701-299-7)
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air immediately. Get medical attention immediately. If unconscious, place in recovery position and seek medical advice.
In case of contact, immediately flush skin with soap and plenty of water. After contact with the hot product, cool rapidly with cold water. Call a physician immediately.
Symptoms: May cause an allergic skin reaction.
Rinse thoroughly with plenty of water, also under the eyelids. If easy to do, remove contact lens, if worn. Call a physician immediately.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Call a physician immediately.
Immediate Medical Attention
Get medical attention immediately (inhalation). Call a physician immediately (skin, eye, ingestion).
Medical Treatment
Therapeutically measures: basic help, decontamination, symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Do not inhale explosion gases or combustion gases
Standard procedure for chemical fires.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
collect with non-combustible absorbent material and place in container for disposal according to local / national regulations (see section 13)
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from fire (No Smoking).
Keep container tightly closed.
Keep away from fire (No Smoking).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : Nitrile rubber GB 6 / 15 EN; Glove thickness : >= 0.425 mm; Wearing time : 240 - 480 min; Material : Fluorocarbon rubber (Viton) / butyl-rubber; Glove thickness : >= 0.7 mm; Wearing time : 240 - 480 min; Remarks : The data about break through time/strength of material are standard values! The exact break through time/strength of material has to be obtained from the producer of the protective glove.
Safety glasses with side-shields conforming to EN166
In the case of vapour formation use a respirator with an approved filter. In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air. Filter type : Organic vapour type (A)
Protective work clothing (EN 340)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No decomposition if used as directed.
Vapours may form explosive mixture with air.
Temperatures greater than recommended storage temperature.
Oxidizing agents
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NOVARES LM 1000?
The signal word is warning.
What is the physical form of NOVARES LM 1000?
NOVARES LM 1000 is a liquid appearing as liquid with light yellow color. It has characteristic, aromatic odor.
What is NOVARES LM 1000 used for?
Synthetic resin, Raw material for adhesives, sealants, coatings, printing inks and rubbergoods, The uses are specified in the attached document
What are the hazard statements for NOVARES LM 1000?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of NOVARES LM 1000?
The melting point is No data available and the boiling point is > 250 °CMethod: OECD Test Guideline 103.