Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LAICRIL P-1450
- Product Code
- PTF/SFP - 3410
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industry for paints, lacquers and varnishes. Binder in decorative coatings.
Manufacturers & Suppliers
LAIEX, S.L.
manufacturer
Pol. Ind. Fuente del Jarro; C/Islas Canarias, 65, PATERNA, VALENCIA
(+34) 961 321 012
http://www.laiex.com
Emergency Contacts
Emergency Contact
(+34) 961 321 012
Only available during office hours; Monday-Friday; 08:00-18:00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-benzothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.025 - 0.05% | Yes |
| Reaction mass:5-chloro-2-methyl-2H-isothiazole-3-one [N. CE 247-500-7] and 2-methyl-2H-isothiazole-3-one [N. CE 220-239-6] (3:1). | 55965-84-9 | 0.0002 - 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take the victim into open air; keep them warm and calm. If breathing is irregular or stops, perform artificial respiration. Do not administer anything orally. If unconscious, place them in a suitable position and seek medical assistance.
Remove contaminated clothing. Wash skin vigorously with water and soap or a suitable skin cleaner. NEVER use solvents or thinners.
If wearing contact lenses, remove them. Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling eyelids up, and seek medical assistance.
If accidentally ingested, seek immediate medical attention. Keep calm. NEVER induce vomiting.
Immediate Medical Attention
Seek medical assistance if symptoms persist or in cases of inhalation, eye contact, or ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguisher powder or CO2. In case of more serious fires, also alcohol-resistant foam and water spray.
Do not use a direct stream of water to extinguish.
Fire can cause thick, black smoke. Exposure to combustion or decomposition products can be harmful to your health.
Use water to cool tanks, cisterns, or containers close to the heat source or fire. Take wind direction into account.
Firefighter Protection
According to the size of the fire, it may be necessary to use protective suits against the heat, individual breathing equipment, gloves, protective goggles or facemasks, and gloves.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For exposure control and individual protection measures, see section 8.
Product not classified as hazardous for the environment, avoid spillage as much as possible.
Pick up the spill with non-combustible absorbent materials. Pour the product and the absorbent in an appropriate container.
Materials: soil, sand, vermiculite, diatomite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The product does not require special handling measures, the following general measures are recommended: For personal protection, see section 8. Never use pressure to empty the containers. They are not pressureresistant containers.
Store the containers between 5 and 35º C, in a dry and well-ventilated place.
In the application area, smoking, eating, and drinking must be prohibited. Follow legislation on occupational health and safety.
sources of heat, radiation, electricity should be avoided
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation, which can be achieved by using good local exhaust-ventilation and a good general exhaust system.
If the product is handled correctly, no individual protection equipment is necessary.
If the product is handled correctly, no individual protection equipment is necessary.
If the recommended technical measures are observed, no individual protection equipment is necessary.
PPE: Work footwear. Characteristics: «CE» marking, category II. CEN standards: EN ISO 13287, EN 20347 This product adapts to the first user's foot shape. That is why, as well as for hygienic reasons, Maintenance: it should not be used by other people. Work footwear for professional use includes protection elements aimed at protecting users Observations: against any injury resulting from an accident
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under the recommended handling and storage conditions (see section 7).
The product does not present hazards by their reactivity.
The product does not present possibility of hazardous reactions.
Avoid any improper handling.
oxidising agents and from highly alkaline or acidic materials
No decomposition if used for the intended uses.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LAICRIL P-1450?
The signal word is no signal word.
What is the physical form of LAICRIL P-1450?
LAICRIL P-1450 is a liquid appearing as milky liquid. . It has characteristic odor.
What is the solubility of LAICRIL P-1450?
Water miscible.
What is LAICRIL P-1450 used for?
Industry for paints, lacquers and varnishes. Binder in decorative coatings.
What is the melting point of LAICRIL P-1450?
The melting point is N.A. and the boiling point is <100 ºC.