Hemolysis Stability Solution

Remove casualty to fresh air and keep warm and at rest. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.

Remove contaminated clothing and shoes. Gently wash with plenty of soap and water. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Not expected to present a significant skin hazard under anticipated conditions of normal use.

Rinse immediately carefully and thoroughly with eye-bath or water. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Not expected to present a significant eye contact hazard under anticipated conditions of normal use.

Rinse mouth thoroughly with water. Get medical advice/attention.

Symptoms: Not expected to present a significant ingestion hazard under anticipated conditions of normal use.

carbon dioxide (CO2), powder, alcohol-resistant foam, water spray.

Strong water jet.

Not flammable. Heating will cause a rise in pressure with a risk of bursting.

Evacuate area. Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire fighting water from entering the environment.

Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Wear recommended personal protective equipment. Ensure procedures and training for emergency decontamination and disposal are in place.

take up in non-combustible absorbent material and shovel into container for disposal.

Recover large spills by pumping (use an explosion proof or hand pump).

Do not allow to enter into surface water or drains.

Stop leak if safe to do so. Dam up the liquid spill. Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal. Recover large spills by pumping (use an explosion proof or hand pump). Place in a suitable container for disposal in accordance with the waste regulations (see Section 13).

Materials: non-combustible absorbent material

Provide adequate ventilation. Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Do not breathe vapours. Avoid contact with skin, eyes and clothing. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Avoid release to the environment.

Store in a dry, cool and well-ventilated place.

Keep good industrial hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothes. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse.

Provide adequate ventilation. Organisational measures to prevent /limit releases, dispersion and exposure. See Section 7 for information on safe handling .

Wear chemically resistant gloves (tested to EN374) . The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.

Use suitable eye protection (EN166): Safety glasses with side shields

In case of insufficient ventilation, wear suitable respiratory equipment. Half-face mask (DIN EN 140). full face mask (DIN EN 136). Filter type: A (EN 141). The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. (EN 137)

Wear suitable protective clothing

Avoid release to the environment. Comply with applicable Community environmental protection legislation.

Stable under normal conditions.

Reference to other sections 10.4 & 10.5.

No dangerous reactions known under normal conditions of use.

See Section 7 for information on safe handling.

See Section 7 for information on safe handling.

Reference to other sections 5.2.