Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lysis Solution
- Product Form
- Mixture
- Product Code
- CC22-109
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For in vitro diagnostic use.
Uses advised against
Any other use other than that indicated as relevant.
Manufacturers & Suppliers
ELITechGroup
manufacturer
ElitechGroup Spa
manufacturer
C.so Svizzera 185, 10149 Torino, Italy
+39 011 97.61.91
ELITechGroup
Emergency Contacts
Emergency Contact
+39 011 97.61.91
monday – friday; 8:30-13; 14:00-17:30
IT
Centro Antiveleni di Bergamo Azienda Ospedaliera Papa Giovanni XXII
+39 800 88 33 00
Centro Antiveleni di Milano Ospedale Niguarda Ca' Granda
+39 02 6610 1029
Centro Antiveleni di Roma CAV Policlinico "A. Gemelli", Dipartimento di Tossicologia Clinica Universita Cattolica del Sacro Cuore
+39 06 305 4343
Centro Antiveleni di Roma CAV Policlinico "Umberto I", Università di Roma
+39 06 4997 8000
Centro Antiveleni di Firenze Az. Osp. "Careggi" U.O. Tossicologia Medica, S.O.D. di Tossicologia Clinicaicologia Clinica
+39 055 794 7819
Centro Antiveleni di Pavia CAV Centro Nazionale di Informazione Tossicologica, Istituti Clinici Scientifici Maugeri Spa
+39 03 822 4444
Centro Antiveleni di Roma CAV "Osp. Pediatrico Bambino Gesù" Dip. Emergenza e Accettazione DEA
+39 06 6859 3726
Centro Antiveleni di Foggia Az. Osp. Univ. Foggia
+39 800 183 459
Centro Antiveleni di Napoli Az. Osp. "A. Cardarelli"
+39 081 54 53 333
Centro Antiveleni di Verona Azienda Ospedaliera Integrata Verona
+39 800 011 858
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Symptoms: Although no precise data are known regarding the health effects on humans and animals, inhalation of this material is considered to present a risk.
Wash skin with plenty of water. Remove contaminated clothing. In case of skin irritation: consult a doctor.
Symptoms: skin irritation
Rinse thoroughly for several minutes. Remove any contact lenses if it is easy to do so. Continue rinsing. Call a doctor immediately.
Symptoms: Severe eye damage
If the person is conscious, rinse the mouth with plenty of water. Do not induce vomiting. Seek medical advice.
Symptoms: None under normal conditions.
Immediate Medical Attention
Call a doctor immediately in case of eye contact. Seek medical advice in case of ingestion or skin irritation.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Do not use a compact jet of water.
Fire hazard: No fire risk. Danger of explosion: No direct risk of explosion.
Extinguish the fire from a safe distance/protected point. Do not enter the fire area without the appropriate protective equipment, including self-contained breathing apparatus.
Firefighter Protection
Do not act without appropriate protective equipment. Self-contained breathing apparatus. Full body protection
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop the leak if there is no danger. Ventilate the spill area. Avoid contact with eyes and skin. Remove unnecessary personnel.
Inform the authorities if the product enters the sewage system or public waters.
Absorb the spillage to avoid material damage.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Take all necessary technical measures to avoid or minimize the release of the product on the workplace. Wear appropriate personal protective equipment (see section 8).
Keep in a cool place. Protect from sunlight..
Wash contaminated clothing before wearing it again. Do not eat, drink or smoke during use. Wash hands after each handling
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the workplace.
Wear protective gloves.
Safety glasses.
In case of insufficient ventilation, use a suitable respiratory device.
Use suitable protective clothing.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No knowledge of dangerous reactions under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No further information available.
Under normal conditions of storage and use, no hazardous decomposition products should be created.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Cetrimonium chloride)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lysis Solution?
The signal word is danger.
What is the physical form of Lysis Solution?
Lysis Solution is a liquid with not available color. It has not available. odor.
What is the solubility of Lysis Solution?
Not available
What is Lysis Solution used for?
For in vitro diagnostic use.
What are the hazard statements for Lysis Solution?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye injuries.
- H411: Toxic to aquatic organisms with long-lasting effects.
What is the melting point of Lysis Solution?
The melting point is Not applicable and the boiling point is Not available.