Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Allplex™ HPV28 Detection
- Product Code
- HP10372X, HP10373Z
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Seegene Inc.
manufacturer
Taewon Bldg., 91, Ogeum-ro, Songpa-Gu, Seoul, Republic of Korea 05548
82-2-2240-4000
Emergency Contacts
Emergency Contact
+82-2-2195-6596
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
HPV28 A MOM, HPV28 B MOM, Allplex HPV28 PC1, Allplex HPV28 PC2, Allplex HPV28 PC3
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Glycerol EC: 200-289-5 | 56-81-5 | 7 - 12% | No |
| PEG EC: 500-038-2 | 25322-68-3 | 2 - 7% | No |
| RNase-free water | --- | --- | No |
Version 2.1 Revision Date: 2024.04.30 Date of first issue: 2022.03.24
Notes
Not a hazardous substance or mixture
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure area to fresh air immediately. Get medical attention immediately.
Remove contaminated clothing. Flush affected with water and then wash with soap or mild detergent and water. Observe for signs of irritation. If irritation is present, get medical attention.
Wash eyes with large amounts of water or normal saline for at least 15 minutes. Observe for signs of irritation. If irritation is present, get medical attention.
Get medical attention.
Immediate Medical Attention
Get medical attention immediately for inhalation. Get medical attention for ingestion, injection, or if irritation is present after skin or eye contact.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Do not allow run-off from firefighting to enter drains or water courses.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area.
Local authorities should be advised if significant spillages cannot be contained.
Wipe up with absorbent material (e.g., cloth, fleece).
Materials: cloth, fleece
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, eating, and drinking should be prohibited in the application area.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Handle in accordance with good industrial hygiene and safety practice.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a laboratory hood or other ventilated device.
Employee must wear appropriate protective gloves that are made Latex or Nitrile to prevent from contamination. It has to requirements of EN455 part 1-4, minimum of 1.5 AQL(Acceptable Quality Limit) and below. Min. of breakthrough time: 2 hours ≤ Min. of force to break material: 6.0 Newtons ≤ Min. of thickness of surface: 0.05mm ≤
Employees should wear splash proof or dust resistant safety goggles to prevent eye contact with this substance. Use eye protection according to EN 166.
In the case of vapour formation use a respirator with an ap-proved filter.
Employees should wear appropriate protective clothing (laboratory coat with long eaves) and equipment to prevent skin contact with this material.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
No adverse reactions have been reported
No dangerous reaction known under conditions of normal use.
Prolonged Storage
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Allplex™ HPV28 Detection?
The signal word is no signal word.
What is the physical form of Allplex™ HPV28 Detection?
Allplex™ HPV28 Detection is a liquid with no data available color. It has no data available odor.
What is the solubility of Allplex™ HPV28 Detection?
No data available
What is the melting point of Allplex™ HPV28 Detection?
The melting point is No data available and the boiling point is No data available.