Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RD 5 F
- Product Form
- Mixture
- Product Code
- RD5F_A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Industrial use. Use of the substance/mixture : Degrip oil.
Uses advised against
No additional information available
Manufacturers & Suppliers
SOGELUB S.A.
manufacturer
Rue de la Terre à Briques, 13, BE– B-7522 Marquain, Belgium
+32 69 59 09 49
Emergency Contacts
Centre Anti-Poisons/Antigifcentrum c/o Hôpital Central de la Base - Reine Astrid
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C11-C14, isoalkanes, cyclics, aromatics EC: 927-285-2 | --- | 60 - 80% | Yes |
| Carbon dioxide EC: 204-696-9 | 124-38-9 | 2 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest. Obtain medical attention if breathing difficulty persists.
Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.
Take off immediately all contaminated clothing. Wash with plenty of water/... Seek medical attention if ill effect or irritation develops. Wash skin with plenty of water.
Symptoms: Repeated exposure may cause skin dryness or cracking.
In case of eye contact, immediately rinse with clean water for 10-15 minutes. Obtain medical attention if pain, blinking or redness persists. Rinse eyes with water as a precaution.
Symptoms: pain, blinking or redness
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Allow the victim to rest. Do not induce vomiting. Call a physician immediately.
Symptoms: Ingestion unlikely. Risk of lung oedema.
Immediate Medical Attention
Call a physician immediately. Obtain medical attention if breathing difficulty persists. Seek medical attention if ill effect or irritation develops. Obtain medical attention if pain, blinking or redness persists. Obtain emergency medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Carbon dioxide. Water spray. Dry powder. Sand.
Do not use a heavy water stream.
Extremely flammable aerosol. Pressurised container: May burst if heated.
Cool down the containers exposed to heat with a water spray. Evacuate area. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Evacuate area. Do not touch spilled material. No open flames, no sparks, and no smoking.
Avoid release to the environment.
Clean up any spills as soon as possible, using an absorbent material to collect it. Collect the residue by means of a non-combustible absorbent material. Mechanically recover the product.
Materials: absorbent material, non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment. Good ventilation of the workplace required. Store in protected area to prevent accidental perforation. Use only properly specified equipment which is suitable for this product, its supply pressure and temperature. Not to be used for any purpose other than the one the product was designed for. Do not breathe gas, fumes, vapour or spray. Do not pierce or burn, even after use. Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Do not pierce or burn, even after use. Store and handle as though always a serious potential fire/explosion and health hazard exists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source.
Store in protected area to prevent accidental perforation. Use and store away from all naked flames, heat sources or working electrical appliances.
Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash contaminated clothing before reuse. Always wash hands after handling the product.
Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station. Provide local exhaust or general room ventilation.
Protective gloves. The protective gloves to be used must comply with the specifications of the regulation 2016/425 and the resultant standard EN 374. Breakthrough time : refer to the recommendations of the supplier
Eye protection should only be necessary where liquid could be splashed or sprayed. Safety glasses
No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation
Skin protection appropriate to the conditions of use should be provided
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling and storage conditions.
Stable under normal conditions. Extremely flammable aerosol. Pressurised container: May burst if heated.
None under normal conditions.
Open flame. Heat. Direct sunlight. Sparks. Avoid contact with hot surfaces. No flames, no sparks. Eliminate all sources of ignition.
Strong acids. Strong bases. Strong oxidizers.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RD 5 F?
The signal word is danger.
What is the physical form of RD 5 F?
RD 5 F is a liquid with light yellow. color. It has characteristic. odor.
What is the solubility of RD 5 F?
insoluble in water.
What is RD 5 F used for?
Main use category : Industrial use. Use of the substance/mixture : Degrip oil.
What are the hazard statements for RD 5 F?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of RD 5 F?
The melting point is Not applicable and the boiling point is Not available.