NextSDS Logo
Safety Data Sheet EN

RD 22

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RD 22
Product Form
Mixture
Product Code
RD22_A

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Main use category : Industrial use. Use of the substance/mixture : Lubricant

Uses advised against

No additional information available

Manufacturers & Suppliers

S

SOGELUB S.A.

manufacturer

Rue de la Terre à Briques, 13 BE– B-7522 Marquain Belgium

+32 69 59 09 49

Emergency Contacts

Centre Anti-Poisons/Antigifcentrum

+32 70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
STOT SE Cat. 3 H336
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe spray.
P273 Avoid release to the environment.
P312 Call a POISON CENTER, doctor if you feel unwell.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C, 122 °F.
P501 Dispose of contents and container to a hazardous or special waste collection point.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
butane (containing ≥ 0,1% butadiene (203-450-8)) EC: 203-448-7 106-97-8 30 - 40% Yes
Hydrocarbure, C6, Isolacanes (<5% n-hexane) EC: 931-254-9 64742-49-0 20 - 30% Yes
Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 927-241-2 --- 10 - 20% Yes
n-hexane EC: 203-777-6 110-54-3 0.1 - 0.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest. Obtain medical attention if breathing difficulty persists.

Symptoms: Vapours may cause drowsiness and dizziness. Inhalation of high concentration vapours may cause respiratory irritation.

Skin contact

Take off immediately all contaminated clothing. Wash with plenty of water/…. Seek medical attention if ill effect or irritation develops. Wash skin with plenty of water.

Symptoms: ill effect or irritation

Eye contact

In case of eye contact, immediately rinse with clean water for 10-15 minutes. Contact ophthalmologist immediately. Rinse eyes with water as a precaution.

Symptoms: Burning sensation. Redness.

Ingestion

Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Allow the victim to rest. Do not induce vomiting. Call a physician immediately.

Symptoms: Ingestion unlikely. Risk of lung oedema.

Immediate Medical Attention

Call a physician immediately. Obtain medical attention if breathing difficulty persists. Seek medical attention if ill effect or irritation develops. Contact ophthalmologist immediately. Obtain emergency medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. Carbon dioxide. Water spray. Dry powder. Sand.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Extremely flammable aerosol. Pressurised container: May burst if heated.

Instructions

On heating, there is a risk of bursting due to internal pressure build-up. Cool down the containers exposed to heat with a water spray. Evacuate area. Exercise caution when fighting any chemical fire.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate spillage area. Evacuate area. Do not touch spilled material. No open flames, no sparks, and no smoking. Avoid breathing dust/fume/gas/mist/vapours/spray.

Environmental

Avoid release to the environment.

Cleanup methods

Clean up any spills as soon as possible, using an absorbent material to collect it. Collect the residue by means of a non-combustible absorbent material. Mechanically recover the product.

Materials: non-combustible absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment. Good ventilation of the workplace required. Store in protected area to prevent accidental perforation. Use only properly specified equipment which is suitable for this product, its supply pressure and temperature. Not to be used for any purpose other than the one the product was designed for. Do not breathe gas, fumes, vapour or spray. Do not pierce or burn, even after use. Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Store and handle as though always a serious potential fire/explosion and health hazard exists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapours/spray.

Storage

Store in protected area to prevent accidental perforation. Use and store away from all naked flames, heat sources or working electrical appliances.

Hygiene

Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash contaminated clothing before reuse. Always wash hands after handling the product.

Fire prevention

Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Store and handle as though always a serious potential fire/explosion and health hazard exists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station. Provide local exhaust or general room ventilation.

Hands

The protective gloves to be used must comply with the specifications of the regulation 2016/425 and the resultant standard EN 374. Breakthrough time : refer to the recommendations of the supplier

Eyes

Eye protection should only be necessary where liquid could be splashed or sprayed

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment

Skin/Body

Skin protection appropriate to the conditions of use should be provided

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
---
Colour
Black.
Colour Intensity
---
Form
---
Odor
characteristic.
Odor Threshold
Not available
Ph
Not applicable
Melting Point
Not applicable
Boiling Point
Not available
Flash Point
< 0 °C (PA)
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not available
Vapor Density
---
Relative Density
Not available
Bulk Density
---
Density
0,74 (PA)
Flammability
Extremely flammable aerosol.
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Not available
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
552 g/l (86%)
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
< 20,5 mm²/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable at normal handling and storage conditions.

Reactivity

Extremely flammable aerosol. Pressurised container: May burst if heated.

Hazardous reactions

None under normal conditions.

Avoid

Open flame. Heat. Direct sunlight. Sparks. Take precautionary measures against static discharges. Avoid contact with hot surfaces. No flames, no sparks. Eliminate all sources of ignition.

Incompatible

Strong acids. Strong bases. Strong oxidizers.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.1
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for RD 22?

The signal word is danger.

What is the physical form of RD 22?

RD 22 is a liquid with black. color. It has characteristic. odor.

What is the solubility of RD 22?

Not available

What is RD 22 used for?

Main use category : Industrial use. Use of the substance/mixture : Lubricant

What are the hazard statements for RD 22?

This substance has 4 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H336: May cause drowsiness or dizziness.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of RD 22?

The melting point is Not applicable and the boiling point is Not available.