Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Potassium peroxodisulfate for analysis EMSURE®
- Product Code
- 1.05091
- Chemical Name
- Potassium peroxodisulfate
Regulatory Identifiers
- CAS Number
- 7727-21-1 Check regulations →
- REACH No.
- 01-2119495676-19-XXXX
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Millipore
manufacturer
Sigma-Aldrich Chemie GmbH
manufacturer
Eschenstrasse 5, D-82024 TAUFKIRCHEN
+49 (0)89 6513-1130
Emergency Contacts
CHEMTREC Deutschland
0800 181 7059
CHEMTREC weltweit
+49 (0)696 43508409
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Potassium persulfate EC: 231-781-8 | 7727-21-1 | 90 - 100% | Yes |
Millipore- 1.05091 The life science business of Merck operates as MilliporeSigma in the US and Canada
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Fire may cause evolution of: Sulphur oxides Has a fire-promoting effect due to release of oxygen. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully. Dispose of properly. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Potassium sulfate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7778-80-5
Potassium dihydrogen phosphate for analysis EMSURE® ISO
CAS: 7778-77-0
Potassium chloride for analysis EMSURE®
CAS: 7447-40-7
Potassium dichromate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7778-50-9
Potassium iodate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7758-05-6
di-Sodium oxalate for analysis EMSURE®
CAS: 62-76-0
Potassium nitrate for analysis EMSURE® ISO,Reag. Ph Eur
CAS: 7757-79-1
Potassium nitrate for analysis EMSURE® ISO,Reag. Ph Eur
CAS: 7757-79-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Work under hood. Do not inhale substance/mixture.
Tightly closed. Keep locked up or in an area accessible only to qualified or authorised persons. Do not store near combustible materials.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : Nitrile rubber; Break through time : 480 min; Glove thickness : 0,11 mm; Protective index : Full contact; Manufacturer : KCL 741 Dermatril® L; Material : Nitrile rubber; Break through time : 480 min; Glove thickness : 0,11 mm; Protective index : Splash contact; Manufacturer : KCL 741 Dermatril® L; Remarks : This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
No data available
Risk of ignition or formation of inflammable gases or vapours with: Exothermic reaction with: Reducing agents, combustible substances, Sodium hydroxide, Potassium hydroxide, alkali hydroxides, Water
no information available
No data available
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1492
- Shipping Name
- POTASSIUM PERSULPHATE
- Transport Class
- 5.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Potassium peroxodisulfate for analysis EMSURE®?
The signal word is danger.
What is the physical form of Potassium peroxodisulfate for analysis EMSURE®?
Potassium peroxodisulfate for analysis EMSURE® is a solid with white color. It has odourless odor.
What is Potassium peroxodisulfate for analysis EMSURE® used for?
Reagent for analysis
What are the hazard statements for Potassium peroxodisulfate for analysis EMSURE®?
This substance has 7 hazard statements:
- H272: May intensify fire; oxidizer.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of Potassium peroxodisulfate for analysis EMSURE®?
The melting point is 100 °C and the boiling point is No data available.