Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Perfluorobutane-1-sulphonic acid
- Chemical Name
- perfluorobutanesulfonic acid
Regulatory Identifiers
- CAS Number
- 375-73-5* Check regulations →
Manufacturers & Suppliers
Apollo Scientific
manufacturer
Whitefield Road, Bredbury SK62QR United Kingdom
01614060505
http://www.apolloscientific.co.uk/
Apollo Scientific Ltd
manufacturer
Whitefield Road, Bredbury Cheshire SK6 2QR United Kingdom (NI)
+44(0) 161 406 0505
apolloscientific.co.uk
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Perfluorobutane-1-sulphonic acid | --- | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If fumes or combustion products are inhaled remove from contaminated area. Lay patient down. Keep warm and rested. Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor, without delay.
Symptoms: Inhalation of vapours or aerosols (mists, fumes) may cause lung oedema. Corrosive substances may cause lung damage (e.g. lung oedema, fluid in the lungs).
Immediately flush body and clothes with large amounts of water, using safety shower if available. Quickly remove all contaminated clothing, including footwear. Wash skin and hair with running water. Continue flushing with water until advised to stop by the Poisons Information Centre. Transport to hospital, or doctor. Skin lesions require copious saline irrigation. Treat chemical burns as thermal burns with non-adherent gauze and wrapping. Deep second-degree burns may benefit from topical silver sulfadiazine.
Immediately hold eyelids apart and flush the eye continuously with running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. Transport to hospital or doctor without delay. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. Eye injuries require retraction of the eyelids to ensure thorough irrigation of the conjunctival cul-de-sacs. Irrigation should last at least 20-30 minutes. DO NOT use neutralising agents or any other additives. Several litres of saline are required.
If swallowed do NOT induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. Observe the patient carefully. Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious. Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. Immediate dilution (milk or water) within 30 minutes post ingestion is recommended.
Immediate Medical Attention
Transport to hospital or doctor without delay. Urgent hospital treatment is likely to be needed.
Medical Treatment
Treat with 100% oxygen initially. Respiratory distress may require circothyroidotomy if endotracheal intubation is contraindicated by excessive swelling. Intravenous lines should be established immediately in all cases where there is evidence of circulatory compromise. Before any such manifestation, the administration of a spray containing a dexamethasone derivative or beclomethasone derivative may be considered. This must definitely be left to a doctor or person authorised by him/her. Cycloplegic drops, (1% cyclopentolate for short-term use or 5% homatropine for longer term use) antibiotic drops, vasoconstrictive agents or artificial tears may be indicated dependent on the severity of the injury. Steroid eye drops should only be administered with the approval of a consulting ophthalmologist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
There is no restriction on the type of extinguisher which may be used. Use extinguishing media suitable for surrounding area.
Acids may react with metals to produce hydrogen, a highly flammable and explosive gas. Heating may cause expansion or decomposition leading to violent rupture of containers. May emit corrosive, poisonous fumes. May emit acrid smoke.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Drains for storage or use areas should have retention basins for pH adjustments and dilution of spills before discharge or disposal of material. Check regularly for spills and leaks. Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Control personal contact with the substance, by using protective equipment. Contain and absorb spill with sand, earth, inert material or vermiculite. Wipe up. Place in a suitable, labelled container for waste disposal.
See section 12
Wipe up. Place in a suitable, labelled container for waste disposal.
Related Products
Similar products with comparable safety profiles
Perfluorobutylsulphonamide
CAS: 30334-69-1*
1H,1H,2H,2H-Tridecafluorooctane-1-sulphonic acid
CAS: 27619-97-2*
Perfluorohexanoic acid
---
Perfluoro-3-methoxypropanoic acid
CAS: 377-73-1*
Perfluorooctanoic acid
CAS: 335-67-1
Perfluorooctanoic acid
CAS: 335-67-1
Perfluorodecanoic acid
CAS: 335-76-2*
Fluorosulfonic acid
CAS: 7789-21-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. Avoid contact with moisture. Avoid contact with incompatible materials. When handling, DO NOT eat, drink or smoke. Keep containers securely sealed when not in use. Avoid physical damage to containers. Always wash hands with soap and water after handling. Work clothes should be laundered separately. Launder contaminated clothing before re-use. Use good occupational work practice. Observe manufacturer's storage and handling recommendations contained within this SDS. Atmosphere should be regularly checked against established exposure standards to ensure safe working conditions are maintained. DO NOT allow clothing wet with material to stay in contact with skin
Store in original containers. Keep containers securely sealed. Store in a cool, dry, well-ventilated area. Store away from incompatible materials and foodstuff containers. Protect containers against physical damage and check regularly for leaks. Store at 2-8°C. Moisture sensitive. Store under argon.
When handling, DO NOT eat, drink or smoke. Always wash hands with soap and water after handling. Work clothes should be laundered separately. Launder contaminated clothing before re-use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Contact with alkaline material liberates heat
See section 7
See section 7
See section 7
See section 7
See section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2586
- Shipping Name
- ALKYLSULPHONIC ACIDS, LIQUID or ARYLSULPHONIC ACIDS, LIQUID with not more than 5% free sulphuric acid
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Perfluorobutane-1-sulphonic acid?
The signal word is danger.
What is the physical form of Perfluorobutane-1-sulphonic acid?
Perfluorobutane-1-sulphonic acid is a liquid .
What are the hazard statements for Perfluorobutane-1-sulphonic acid?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.