Ethanol 99% denatured with methanol GPR RECTAPUR® (industrial methylated spirit)

Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.

Water spray, ABC-powder, Carbon dioxide (CO2), Nitrogen

no restriction

In case of fire may be liberated: Pyrolysis products, toxic

Use water spray jet to protect personnel and to cool endangered containers. In case of fire: Evacuate area. Use caution when applying carbon dioxide in confined spaces. Carbon dioxide can displace oxygen.

Remove persons to safety.

Discharge into the environment must be avoided.

Collect in closed and suitable containers for disposal.

All work processes must always be designed so that the following is as low as possible: Inhalation, skin contact, Eye contact. Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke.

Keep container tightly closed and in a well-ventilated place.

Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke.

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: -, Breakthrough time: 240-480 min, Recommended glove articles: VWR 112-3717 / 112-1381. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,425 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-0971

Eye glasses with side protection DIN-/EN-Norms DIN EN 166. Recommendation: VWR 111-0432

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

The product is chemically stable under standard ambient conditions (room temperature).

Reactive substance. Vapours can form explosive mixtures with air. Risk of ignition.

Violent reaction with: Alkali metals, Acetic anhydride, Peroxides, Nitric acid, Phosphorus oxides (e.g. P2O5), Perchlorates

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

See section 7 of the safety data sheet.

Decomposition products in case of fire: see section 5.

Passage forbidden through tunnels of category D when carried in bulk or in tanks. Passage forbidden through tunnels of category E.