Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ethanol 96% vol denatured with 3% isopropanol TechniSolv®
- Product Code
- 87137
- Chemical Name
- Ethanol
Regulatory Identifiers
- CAS Number
- 64-17-5 Check regulations →
Identified Uses
General chemical reagent
Manufacturers & Suppliers
VWR International Ltd.
national supplier
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.
Immediate Medical Attention
Obtain immediate medical attention if swallowed. Consult an ophthalmologist for eye contact. Consult a physician in case of skin reactions.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, ABC-powder, Carbon dioxide (CO2), Nitrogen
no restriction
In case of fire may be liberated: Pyrolysis products, toxic
Use water spray jet to protect personnel and to cool endangered containers. In case of fire: Evacuate area. Use caution when applying carbon dioxide in confined spaces. Carbon dioxide can displace oxygen.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of major fire and large quantities: Remove persons to safety.
Discharge into the environment must be avoided.
Collect in closed and suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Ethanol 96% denatured with 5% methanol
---
Ethanol absolute TechniSolv®
CAS: 64-17-5
Ethanol 70% V/V denatured
CAS: 64-17-5
Ethanol ≥70 %, denatured
---
Ethanol ≥70 %, denatured
UFI: 55H0-A0HQ-M009-656S
Ethanol denatured 93-99%
UFI: H4C6-WD2V-293V-C9HE
Ethanol denatured 70%
---
Ethanol 70 %, Biocide Grade, denatured
CAS: 64-17-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
All work processes must always be designed so that the following is as low as possible: Inhalation, skin contact, Eye contact. Keep away from sources of ignition - No smoking. Usual measures for fire prevention. Take precautionary measures against static discharges. Protect from moisture.
Keep container tightly closed and in a well-ventilated place. Keep/Store away from combustible materials.
Keep away from sources of ignition - No smoking. Usual measures for fire prevention. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: CR (polychloroprene, chloroprene rubber), Thickness of the glove material: 0,75 mm, Breakthrough time (maximum wearing time): 120-240 min, Recommended glove articles: VWR 112-2308. By long-term hand contact: Suitable material: Butyl caoutchouc (butyl rubber)/FKM (fluoro rubber), Thickness of the glove material: 0,70 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3819
Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432
Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
no data available
no data available
no data available
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT/vPvB assessment
12.6 Endocrine disrupting properties
12.6 Other adverse effects
12.1 Ecotoxicity
12.1 Ecotoxicity
12.1 Ecotoxicity
12.1 Ecotoxicity
12.1 Ecotoxicity
12.1 Toxicity
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1170
- Shipping Name
- ETHANOL
- Transport Class
- 3
- Packing Group
- II
Passage forbidden through tunnels of category D when carried in bulk or in tanks. Passage forbidden through tunnels of category E.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ethanol 96% vol denatured with 3% isopropanol TechniSolv®?
The signal word is danger.
What is the physical form of Ethanol 96% vol denatured with 3% isopropanol TechniSolv®?
Ethanol 96% vol denatured with 3% isopropanol TechniSolv® is a liquid appearing as liquid, colourless with colourless color. It has no data available odor.
What is Ethanol 96% vol denatured with 3% isopropanol TechniSolv® used for?
General chemical reagent
What are the hazard statements for Ethanol 96% vol denatured with 3% isopropanol TechniSolv®?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
What is the melting point of Ethanol 96% vol denatured with 3% isopropanol TechniSolv®?
The melting point is -114 °C and the boiling point is 78.3 °C (1013 hPa).