Sulfuric acid 96% Ultrapur

Fresh air. Call in physician.

Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

Rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

Make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Not combustible. Ambient fire may liberate hazardous vapours.

Suppress (knock down) gases/vapors/mists with a water spray jet.

Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains.

Take up with liquid-absorbent and neutralising material. Dispose of properly. Clean up affected area.

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H ⁺ , Merck Art. No. 101595)

For precautions see section 2.2.

Recommended storage temperature see product label.

Full contact Material: Viton® Minimum layer thickness: 0,7 mm Break through time: 480 min Material tested:Vitoject® (KCL 890 / Aldrich Z677698, Size M). Splash contact Material: butyl-rubber Minimum layer thickness: 0,7 mm Break through time: 120 min Material tested:Butoject® (KCL 898). This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles

required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type ABEK. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Acid-resistant protective clothing

Do not let product enter drains.

The product is chemically stable under standard ambient conditions (room temperature) .

has a corrosive effect, strong oxidising agent

A risk of explosion and/or of toxic gas formation exists with the following substances: Alkali metals alkali compounds Ammonia Aldehydes acetonitrile Alkaline earth metals alkalines Acids alkaline earth compounds Metals metal alloys Oxides of phosphorus phosphorus hydrides halogen-halogen compounds oxyhalogenic compounds permanganates nitrates Carbides combustible substances organic solvent acetylidene Nitriles organic nitro compounds anilines Peroxides picrates nitrides lithium silicide iron(III) compounds bromates chlorates Amines perchlorates hydrogen peroxide

no information available

animal/vegetable tissues, Metals. Contact with metals liberates hydrogen gas.

In the event of fire: see section 5