Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEXAKTIV E
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Textile industry- Textile auxiliary, PC-TEC-23 (Textile and leather treatment products including auxiliaries)
Uses advised against
The product should not be used in ways other than those referred in Section 1.
Manufacturers & Suppliers
INOTEX spol. s r.o.
manufacturer
Štefánikova 1208, Dvůr Králové nad Labem, 544 01, Czech Republic
+420 499 316 320
http://www.inotex.cz
Emergency Contacts
Emergency Contact
112
Toxicology Information Center, Prague, CZ
+420224 919 293
Toxicology Information Center, Prague, CZ
+420 224 915 402
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture contains these hazardous substances and substances with the highest permissible concentration in the working environment: none
First Aid Measures
Emergency procedures for chemical exposure incidents
Terminate the exposure immediately; move the affected person to fresh air.
Symptoms: Inhalation of vapors may cause respiratory irritation.
Remove contaminated clothes. Rinse skin with water or shower.
Symptoms: Not expected.
Rinse eyes immediately with a flow of running water, open the eyelids (also using force if needed); remove contact lenses immediately if worn by the affected person.
Symptoms: Not expected.
DO NOT INDUCE VOMITING - even the inducted vomiting can cause complications as in case of detergents and other foaming substances.
Symptoms: Not expected.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Accommodate extinguishing components to the location of fire.
not available
Fire produces heavy, black smoke, with potential development of carbon monoxide and dioxide and other toxic gases.
Firefighter Protection
Self-Contained Breathing Apparatus (SCBA) with chemical resistant gloves. Use a self-contained breathing apparatus and full-body protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow the instructions in the Sections 7 and 8.
Prevent contamination of the soil and entering surface or ground water.
Collect the product in a suitable mechanical manner, for example using vacuum equipment.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with skin and eyes. Do not inhale dust. Use personal protective equipment as per Section 8. Observe valid legal regulations on safety and health protection.
Store in tightly closed containers in cold, dry and well ventilated areas designated for this purpose. Protect against frost.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
When handling in long-term or repeatedly, use protective gloves.
EN166 - Personal Eye Protection Standard.
Half-mask with anti-dust filter FFP2 when the exposition limits of substances are exceeded or in the location with insufficient ventilation.
Observe usual measures for protection of the environment, see Section 6.2.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Under normal conditions, the mixture is stable with a tendency to hydrolysis in a neutral aqueous environment.
When used in the standard way, there is not any dangerous reaction with other substances.
With oxidizing agents.
Keep the mixture away from sources of heat, sparks and open flames. Dust can form an explosive mixture when mixed with air. Store away from strong oxidizing agents.
Oxidizing agents.
Carbon monoxide (CO). Carbon dioxide (CO2) Nitrogen oxides (NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEXAKTIV E?
The signal word is no signal word.
What is the physical form of TEXAKTIV E?
TEXAKTIV E is a solid with white color. It has characteristic odor.
What is TEXAKTIV E used for?
Textile industry- Textile auxiliary, PC-TEC-23 (Textile and leather treatment products including auxiliaries)
What is the melting point of TEXAKTIV E?
The melting point is data not available and the boiling point is data not available.