Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEXAZYM PF neu
- Product Code
- 40000129
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- XG9J-T842-GQ38-UC14
Identified Uses
Textile industry- Textile auxiliary; PC-TEC-23: Textile and leather treatment products including auxiliaries (excludes dyes and pigments)
Uses advised against
The product should not be used in ways other than those referred in Section 1.
Manufacturers & Suppliers
INOTEX spol. s r.o.
manufacturer
Štefánikova 1208, Dvůr Králové nad Labem, 544 01, Czech Republic
+420 499 316 320
www.inotex.cz
Emergency Contacts
European emergency number
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C12-15-branched and linear, ethoxylated propoxylated EC: 639-733-1 | 120313-48-6 | 5% | Yes |
| amylase, α- EC: 232-565-6 | 9000-90-2 | 1.5% | Yes |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 0.1% | Yes |
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Terminate the exposure immediately; move the affected person to fresh air.
Symptoms: Inhalation of aerosol or dust of the dried mixture may cause respiratory irritation.
Remove contaminated clothes. Wash the affected area with plenty of water, lukewarm if possible. Soap, soap solution or shampoo should be used if there is no skin injury. Provide medical treatment if skin irritation persists.
Symptoms: May cause an allergic skin reaction.
Rinse eyes immediately with a flow of running water, open the eyelids (also using force if needed); remove contact lenses immediately if worn by the affected person. Rinsing should continue at least for 10 minutes.
Symptoms: Not expected.
Rinse out the mouth with water and provide 2-5 dL of water. In the event of issues, find medical help.
Symptoms: Irritation, nausea.
Immediate Medical Attention
Provide medical treatment if skin irritation persists. In the event of issues, find medical help.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water spray jet, water mist. Accommodate extinguishing components to the location of fire.
Water - full jet.
In the event of fire, carbon monoxide, carbon dioxide and other toxic gases may arise. Inhalation of hazardous degradation (pyrolysis) products may cause serious health damage.
Do not allow run-off of contaminated fire extinguishing material to enter drains or surface and ground water.
Firefighter Protection
Self-Contained Breathing Apparatus (SCBA) with a chemical protection suit only where personal (close) contact is likely. Use a self-contained breathing apparatus and full-body protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment for work. Follow the instructions in the Sections 7 and 8. Prevent contact with skin and eyes.
In the event of leakage of the substantial amount of the product, inform fire brigade and other competent bodies.
Prevent contamination of the soil and entering surface or ground water.
For mechanical cleaning, preference should be given to vacuum-operated equipment equipped with an effective filter. Do not flush with high-pressure water jets (aerosols are formed).
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not inhale aerosols. Prevent contact with skin and eyes. Do not inhale dust. Use personal protective equipment as per Section 8. Observe valid legal regulations on safety and health protection.
Store in tightly closed containers in cold, dry and well ventilated areas designated for this purpose. Protect against frost.
Do not eat, drink or smoke during handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under normal conditions.
When used in the standard way, there is not any dangerous reaction with other substances.
Unknown.
Protect against frost.
cationic and anionic surfactants, heavy metals, direct steam, etc.
Not developed under normal uses. Dangerous outcomes such as carbon monoxide and carbon dioxide are formed at high temperature and in fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEXAZYM PF neu?
The signal word is warning.
What is the physical form of TEXAZYM PF neu?
TEXAZYM PF neu is a liquid with yellow color. It has characteristic odor.
What is TEXAZYM PF neu used for?
Textile industry- Textile auxiliary; PC-TEC-23: Textile and leather treatment products including auxiliaries (excludes dyes and pigments)
What are the hazard statements for TEXAZYM PF neu?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of TEXAZYM PF neu?
The melting point is data not available and the boiling point is 100 °C.