Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EPO-TEK® 920 Part A
- Product Code
- 920/A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive.
Uses advised against
Use only for intended applications.
Manufacturers & Suppliers
Epoxy Technology, Inc.
manufacturer
14 Fortune Drive, Billerica, MA 01821, USA
(978) 667-3805
http://www.epotek.com
Emergency Contacts
ChemTel
+1 (800) 255-3924
ChemTel
+1 (813) 248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bisphenol A Diglycidyl Ether Resin | 25085-99-8 | 10 - 30% | Yes |
| Reactive Diluent | --- | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Get medical attention if any discomfort continues.
Symptoms: Inhalation of dust during cutting, grinding or sanding operations involving this product may cause irritation of the respiratory tract. Gas or vapor in high concentrations may irritate the respiratory system.
Remove contaminated clothing immediately and wash skin with soap and water.
Symptoms: Causes skin irritation. May cause sensitisation by skin contact.
Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention if irritation persists after washing.
Symptoms: Causes serious eye damage.
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Rinse nose and mouth with water. Give plenty of water to drink. Get medical attention if symptoms are severe or persist.
Symptoms: May cause discomfort if swallowed.
Immediate Medical Attention
Get medical attention if any discomfort continues (inhalation). Get medical attention if symptoms are severe or persist (ingestion). Get medical attention if irritation persists after washing (eye contact).
Medical Treatment
Show this Safety Data Sheet to the medical personnel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with foam, carbon dioxide or dry powder.
Special hazards arising from the substance or mixture
Avoid breathing fire gases or vapors.
Firefighter Protection
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid release to the environment.
Absorb spillage with sand or other inert absorbent. Collect and place in suitable waste disposal containers and seal securely.
Materials: sand or other inert absorbent, suitable waste disposal containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle all packages and containers carefully to minimize spills. Avoid contact with skin and eyes. Wear protective clothing as described in Section 8 of this safety data sheet.
Store at room temperature. Keep container tightly sealed when not in use.
Do not eat, drink or smoke when using this product. Provide eyewash station. Wash promptly with soap and water if skin becomes contaminated. Wash after use and before eating, smoking and using the toilet. Wash contaminated clothing before reuse. Use appropriate skin cream to prevent drying of skin.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate general and local exhaust ventilation.
It is recommended that chemical-resistant, impervious gloves are worn.
Wear tight-fitting, chemical splash goggles or face shield.
If ventilation is inadequate, suitable respiratory protection must be worn.
Wear appropriate clothing to prevent any possibility of skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures and when used as recommended.
The following materials may react with the product: Oxidizing materials. Strong reducing agents.
Will not polymerize.
Avoid excessive heat for prolonged periods of time. Avoid heat, flames and other sources of ignition.
Strong oxidizing agents. Strong reducing agents.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
The product contains a substance which is harmful to aquatic organisms and which may cause long-term adverse effects in the aquatic environment.
Persistence and degradability
There are no data on the degradability of this product.
Bioaccumulative potential
No data available on bioaccumulation or partition coefficient.
Mobility in soil
The product is miscible with water and may spread in water systems.
Other adverse effects
Not known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Proprietary information protected pursuant to WTO's Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS), Section 7, Art. 39. Informacje zastrzeżone chronione zgodnie z porozumieniem WTO w sprawie handlowych aspektów praw własności intelektualnej (TRIPS), sekcja 7, art. 39
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EPO-TEK® 920 Part A?
The signal word is danger.
What is the physical form of EPO-TEK® 920 Part A?
EPO-TEK® 920 Part A is a paste appearing as paste with grey color. It has mild odor.
What is the solubility of EPO-TEK® 920 Part A?
Slightly soluble in water.
What is EPO-TEK® 920 Part A used for?
Adhesive.
What are the hazard statements for EPO-TEK® 920 Part A?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of EPO-TEK® 920 Part A?
The melting point is No specific test data are available. and the boiling point is No specific test data are available..