Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEXAZYM NC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Textile industry- Textile auxiliary, PC-TEC-23 (Textile and leather treatment products including auxiliaries)
Uses advised against
The product should not be used in ways other than those referred in Section 1.
Manufacturers & Suppliers
INOTEX spol. s r.o.
manufacturer
Štefánikova 1208, Dvůr Králové nad Labem, 544 01, Czech Republic
+420 499 316 320
http://www.inotex.cz
Emergency Contacts
European emergency number
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| cellulase EC: 232-734-4 | 9012-54-8 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Terminate the exposure immediately; move the affected person to fresh air.
Symptoms: Not expected. May cause respiratory irritation.
Wash the affected area with plenty of water, lukewarm if possible. Remove contaminated clothes.
Symptoms: Not expected. May cause slight redness.
Rinse eyes immediately with a flow of running water, open the eyelids (also using force if needed); remove contact lenses immediately if worn by the affected person.
Symptoms: Not expected. May cause slight redness.
Rinse out the mouth with clean water. In the event of issues, find medical help.
Symptoms: Irritation, nausea.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water spray jet, water mist. Accommodate extinguishing components to the location of fire.
Water - full jet.
In the event of fire, carbon monoxide, carbon dioxide and other toxic gases may arise. Inhalation of hazardous degradation (pyrolysis) products may cause serious health damage.
Firefighter Protection
Self-Contained Breathing Apparatus (SCBA) with chemical resistant gloves. Use a self-contained breathing apparatus and full-body protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow the instructions in the Sections 7 and 8.
Prevent contamination of the soil and entering surface or ground water.
For mechanical cleaning, preference should be given to devices operating with a vacuum and equipped with an effective filter. Do not rinse with high-pressure water jets (aerosols are formed).
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not inhale mist/vapours/spray. Do not inhale dust. Prevent contact with skin and eyes. Use personal protective equipment as per Section 8.
Store in tightly closed containers in cold, dry and well ventilated areas designated for this purpose. Protect against frost. Protect from sunlight.
Do not eat, drink or smoke during handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation.
Protective gloves resistant to the product. EN ISO 374-1. When handling in long-term or repeatedly, use protective gloves.
Protective goggles or face shield (based on the nature of the work performed). EN166 - Personal Eye Protection Standard.
If there is a risk of aerosol formation, use a suitable respirator, filter P2 (EN 143, DIN149).
protective workwear.
Observe usual measures for protection of the environment, see Section 6.2.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under normal conditions. The mixture is stable up to 70°C. Above this temperature, the effectiveness decreases.
When used in the standard way, there is not any dangerous reaction with other substances.
Unknown.
pH < 4, pH > 9, temperature above 0°C. Protect against frost.
When combined with substances unsuitable for enzymes, the effectiveness decreases significantly (cationic and anionic surfactants, heavy metals, direct steam, etc.)
Not developed under normal uses. Dangerous outcomes such as carbon monoxide and carbon dioxide are formed at high temperature and in fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Reference in the Sections 4 to 8. Keep separated from foodstuffs and feed.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEXAZYM NC?
The signal word is no signal word.
What is the physical form of TEXAZYM NC?
TEXAZYM NC is a liquid with yellow-brown color. It has week odor.
What is TEXAZYM NC used for?
Textile industry- Textile auxiliary, PC-TEC-23 (Textile and leather treatment products including auxiliaries)
What is the melting point of TEXAZYM NC?
The melting point is data not available and the boiling point is data not available.