Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEXAZYM DLG new
- Product Code
- 40000234
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 9HKJ-X8KR-NQ37-966W
Identified Uses
Textile industry- Textile auxiliary, PC-TEC-23: Textile and leather treatment products including auxiliaries (excludes dyes and pigments)
Uses advised against
The product should not be used in ways other than those referred in Section 1.
Manufacturers & Suppliers
INOTEX spol. s r.o.
manufacturer
Štefánikova 1208, Dvůr Králové nad Labem, 544 01, Czech Republic
+420 499 316 320
http://www.inotex.cz
Emergency Contacts
European emergency number
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Terminate the exposure immediately; move the affected person to fresh air. Protect the person against growing cold. Provide medical treatment if irritation, dyspnoea or other symptoms persist.
Symptoms: May cause allergy or asthma symptoms or breathing difficulties if inhaled. Inhalation of aerosol may cause respiratory irritation.
Remove contaminated clothes. Wash the affected area with plenty of water, lukewarm if possible. Soap, soap solution or shampoo should be used if there is no skin injury. Provide medical treatment if skin irritation persists.
Symptoms: May cause an allergic skin reaction.
Rinse eyes immediately with a flow of running water, open the eyelids (also using force if needed); remove contact lenses immediately if worn by the affected person. Rinsing should continue at least for 10 minutes.
Symptoms: Not expected.
Rinse out the mouth with clean water. In the event of issues, find medical help.
Symptoms: Irritation, nausea.
Immediate Medical Attention
Provide medical treatment if irritation, dyspnoea or other symptoms persist (inhalation). Provide medical treatment if skin irritation persists (skin). In the event of issues, find medical help (ingestion).
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water spray jet, water mist. Accommodate extinguishing components to the location of fire.
Water - full jet.
In the event of fire, carbon monoxide, carbon dioxide and other toxic gases may arise.
Firefighter Protection
Self-Contained Breathing Apparatus (SCBA) with a chemical protection suit only where personal (close) contact is likely. Use a self-contained breathing apparatus and full-body protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment for work. Follow the instructions in the Sections 7 and 8. Do not inhale mist/vapours/spray. Prevent contact with skin and eyes.
Prevent contamination of the soil and entering surface or ground water.
Take up by mechanical means preferably by vacuum cleaner equipped with a high efficiency filter. Flush remainder carefully with plenty of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of aerosol and dust in concentrations exceeding the occupational exposure limits. Do not inhale aerosols. Prevent contact with skin and eyes. Use personal protective equipment as per Section 8. Observe valid legal regulations on safety and health protection. Do not eat, drink or smoke during handling.
Store in tightly closed containers in cold, dry and well ventilated areas designated for this purpose. Protect against frost. Recommended storage temperature is from +5 °C to +25 °C.
Do not eat, drink or smoke during handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The formulation is stable in the temperature range 40- 60 °C. Above and below this temperature decreases its efficiency.
When used in the standard way, there is not any dangerous reaction with other substances.
Unknown.
pH < 6, pH > 9, t < 40°C, pH > 60°C. Protect from frost.
Cationic and anionic surfactants, heavy metals, direct steam.
Not developed under normal uses. Dangerous outcomes such as carbon monoxide and carbon dioxide are formed at high temperature and in fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEXAZYM DLG new?
The signal word is danger.
What is the physical form of TEXAZYM DLG new?
TEXAZYM DLG new is a liquid with brown color. It has characteristic odor.
What is TEXAZYM DLG new used for?
Textile industry- Textile auxiliary, PC-TEC-23: Textile and leather treatment products including auxiliaries (excludes dyes and pigments)
What are the hazard statements for TEXAZYM DLG new?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
What is the melting point of TEXAZYM DLG new?
The melting point is data not available and the boiling point is 100 °C.