Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WALLAMID KD 11
- Product Code
- 531082
Regulatory Identifiers
- CAS Number
- 68603-42-9 Check regulations →
- EC Number
- 271-657-0 Check regulations →
- REACH No.
- 01-2119490100-53
Identified Uses
Emulsifier
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Wall Chemie GmbH
manufacturer
Am Selder 25, D-47906 KEMPEN, DEUTSCHLAND
+49 2152 8999 0
Emergency Contacts
Emergency Contact
+49 2152 8999 0
office hours
Giftinformationszentrum Nord
+49 551 19240
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
CAS No. Description 68603-42-9 Fatty acid diethanolamide EC number: 271-657-0
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acid diethanolamide EC: 271-657-0 | 68603-42-9 | --- | No |
| 2.2'-Iminodiethanol | 111-42-2 | 5% | No |
Substance name (other) / REACH: Amides, C8-18 (even numbered) and C18-unsatd., N, N-bis(hydroxyethyl) EC: 931-329-6 / CAS: --
Notes
Impurities and stabilising additives: Contains ≤5% of an identified impurity deriving from the process used: 2.2'-Iminodiethanol CAS: 111-42-2
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation. Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment. Rinse mouth. Do not induce vomiting.
Immediate Medical Attention
Risk of aspiration.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
In case of fire, the following can be released: Organic decomposition products, Carbon oxides (COx), Nitrogen oxides (NOx)
Firefighter Protection
Use suitable breathing apparatus if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Open and handle receptacle with care. Wear protective clothing.
None.
Do not eat, drink or smoke in working area.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Material of gloves: e.g. Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.5 mm. Penetration time of glove material: Minimum breakthrough time: > 120 min (Permeation according to EN 374 Part 3: level 4)
Tightly sealed goggles (EN 166).
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under normal ambient conditions.
Product is stable under normal ambient conditions.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Fatty acid diethanolamide)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WALLAMID KD 11?
The signal word is danger.
What is the physical form of WALLAMID KD 11?
WALLAMID KD 11 is a fluid appearing as form: fluid colour: yellowish with yellowish color. It has characteristic odor.
What is WALLAMID KD 11 used for?
Emulsifier
What are the hazard statements for WALLAMID KD 11?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of WALLAMID KD 11?
The melting point is Undetermined. and the boiling point is Undetermined..