Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Calcium chloride dihydrate for analysis EMSURE® ACS, Reag. Ph Eur
- Product Code
- 1.02382
- Chemical Name
- Calcium chloride dihydrate
Regulatory Identifiers
- CAS Number
- 10035-04-8 Check regulations →
- REACH No.
- 01-2119494219-28-XXXX
Identified Uses
Reagent for analysis, Chemical production
Manufacturers & Suppliers
Sigma-Aldrich Chemie GmbH
manufacturer
Eschenstrasse 5, D-82024 TAUFKIRCHEN
+49 (0)89 6513-1130
Emergency Contacts
CHEMTREC Deutschland
0800 181 7059
CHEMTREC weltweit
+49 (0)696 43508409
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium chloride dihydrate EC: 233-140-8 | 10035-04-8 | 90 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water Foam
Not combustible. Fire may cause evolution of: Hydrogen chloride gas. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Cover drains. Collect, bind, and pump off spills. Take up dry. Dispose of properly. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Sodium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7647-14-5
Ammonium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 12125-02-9
Barium chloride dihydrate for analysis EMSURE® ACS, ISO, Reag. Ph Eur
CAS: 10326-27-9
Magnesium chloride hexahydrate for analysis EMSURE® ACS, ISO, Reag. Ph Eur
CAS: 7791-18-6
Mercury(II) chloride for analysis EMSURE® Reag. Ph Eur,ACS
CAS: 7487-94-7
Iron(III) chloride hexahydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 10025-77-1
Iron(III) chloride hexahydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 10025-77-1
Strontium chloride hexahydrate for analysis EMSURE® ACS
CAS: 10025-70-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Change contaminated clothing. Wash hands after working with substance. For precautions see section 2.2.
Tightly closed. Dry.
Change contaminated clothing. Wash hands after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0,11 mm, Protective index : Full contact / Splash contact, Manufacturer : KCL 741 Dermatril® L. Remarks : This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter : Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
No data available
Exothermic reaction with: boron trifluoride, vinylmethyl ether, Water. Generates dangerous gases or fumes in contact with: Metals, Zinc
no information available
No data available
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Calcium chloride dihydrate for analysis EMSURE® ACS, Reag. Ph Eur?
The signal word is warning.
What is the physical form of Calcium chloride dihydrate for analysis EMSURE® ACS, Reag. Ph Eur?
Calcium chloride dihydrate for analysis EMSURE® ACS, Reag. Ph Eur is a solid with white color. It has odourless odor.
What is Calcium chloride dihydrate for analysis EMSURE® ACS, Reag. Ph Eur used for?
Reagent for analysis, Chemical production
What are the hazard statements for Calcium chloride dihydrate for analysis EMSURE® ACS, Reag. Ph Eur?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Calcium chloride dihydrate for analysis EMSURE® ACS, Reag. Ph Eur?
The melting point is No data available and the boiling point is No data available.