Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CA CLEAN II
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For in-vitro diagnosis
Uses advised against
No data available.
Manufacturers & Suppliers
SYSMEX LTD
manufacturer
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, Buckinghamshire, MK8 8DF, United Kingdom
+44 (0)870 902 9210
Emergency Contacts
Giftinformationszentrum Nord
+49 (0)551 192 40
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrogen chloride EC: 231-595-7 | 7647-01-0 | 0.5% | Yes |
| NONYLPHENOL, ETHOXYLATED EC: 500-024-6 | 9016-45-9 | 0.5% | Yes |
| Nonylphenoxy(polyethylenoxy)ethanol EC: 500-209-1 | 68412-54-4 | 0.5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person from the immediate area. Ensure supply of fresh air.
Wash off immediately with soap and water.
Separate eyelids, wash the eyes thoroughly with water (15 min.).
Call a doctor immediately. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Call a doctor immediately. In case of persisting adverse effects, consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet; Carbon dioxide; Extinguishing powder; Foam
High power water jet
In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO); Nitrogen oxides (NOx)
Firefighter Protection
Use self-contained breathing apparatus. Wear protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Do not inhale vapours.
Do not discharge into the drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
Take up with absorbent material
Materials: sand, kieselguhr, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Product inherent handling risks must be minimised taking the appropriate measures for protection and preventive actions. The working process should be designed to rule out the release of hazardous substances or skin contact as far it is possible by the state of the art.
Keep container tightly closed in a cool, well-ventilated place. Containers which are opened must be carefully closed and kept upright to prevent leakage.
Do not eat, drink or smoke during work time. Keep away from food, drink and animal feeding stuffs. Wash hands and skin before breaks and after work. Do not inhale vapours. Avoid contact with eyes and skin. Remove soiled or soaked clothing immediately.
No special measures necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of intensive contact, wear protective gloves (EN 374). Before use, the protective gloves should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer's instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.
Safety glasses (EN 166)
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified.
Normal chemical work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (See section 7).
Dangerous reactions are not expected if the product is handled according to its intended use.
None, if handled according to order.
None, if handled according to intended use.
Oxidizing agents
None, if handled according to intended use.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CA CLEAN II?
The signal word is no signal word.
What is the physical form of CA CLEAN II?
CA CLEAN II is a liquid appearing as liquid, clear with colourless color. It has odourless odor.
What is CA CLEAN II used for?
For in-vitro diagnosis
What is the melting point of CA CLEAN II?
The melting point is No data available and the boiling point is No data available.