Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Heparin Lock Flush Solution, USP
- Synonyms
- Multi-Dose Fliptop Vials
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Hospira Inc.
manufacturer
275 North Field Drive, Lake Forest, Illinois USA 60045
224-212-2000
Emergency Contacts
CHEMTREC
800-424-9300
CHEMTREC
1-703-527-3887
CHEMTREC
(02) 8014 4880
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Active Ingredient Name | Heparin Sodium Chemical Formula | Heparin is an acidic, polymeric mucopolysaccharide composed of units of glucuronic acid and sulfated glucosamine Preparation | Non-hazardous ingredients include Water for Injection. Hazardous ingredients present at less than 1% include sodium chloride, edetate disodium and benzyl alcohol; sodium hydroxide is used to adjust the pH.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Heparin Sodium | 9041-08-1 | 0.1% | No |
| Water for Injection | --- | --- | No |
| sodium chloride | --- | --- | Yes |
| edetate disodium | --- | --- | Yes |
| benzyl alcohol | --- | --- | Yes |
| sodium hydroxide | --- | --- | No |
Notes
Non-hazardous ingredients include Water for Injection. Hazardous ingredients present at less than 1% include sodium chloride, edetate disodium and benzyl alcohol; sodium hydroxide is used to adjust the pH.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from source of exposure. If signs of toxicity occur, seek medical attention.
Remove from source of exposure. Flush with copious amounts of water. If irritation persists or signs of toxicity occur, seek medical attention.
Remove from source of exposure. Flush with copious amounts of water. If irritation persists or signs of toxicity occur, seek medical attention.
Remove from source of exposure. If signs of toxicity occur, seek medical attention.
Immediate Medical Attention
If irritation persists or signs of toxicity occur, seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
As with any fire, use extinguishing media appropriate for primary cause of fire.
None anticipated for this aqueous product.
No special provisions required beyond normal fire fighting equipment such as flame and chemical resistant clothing and self contained breathing apparatus.
Firefighter Protection
No special provisions required beyond normal fire fighting equipment such as flame and chemical resistant clothing and self contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate area around spill. Put on suitable protective clothing and equipment as specified by site spill procedures. Absorb the liquid with suitable material and clean affected area with soap and water.
clean affected area with soap and water
Materials: soap and water
Related Products
Similar products with comparable safety profiles
Flushing Medium With 10 IU/ml Heparin
---
HSH EDTA 15% Solution
---
Potassium standard solution 1000 µg/ml (Plasma HIQU)
---
Pierce® Albumin Removal Binding/Wash Buffer
---
Fluoride standard solution 1000 µg/ml for IC (Ion HIQU)
CAS: 7681-49-4
Lyphochek® Coagulation Control, Level 2
---
0.9% Sodium Chloride Irrigation Solution
---
Desflurane, USP
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special handling required for hazard control under conditions of normal product use.
No special storage required for hazard control. For product protection, follow storage recommendations noted on the product case label, the primary container label, or the product insert.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under standard use and storage conditions.
Not determined.
Not determined. Hazardous Polymerization: Not anticipated to occur with this product.
Not determined.
Not determined.
During thermal decomposition, it may be possible to generate irritating vapors and/or toxic fumes of carbon oxides (COx), nitrogen oxides (NOx), and oxides of sulfur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
All waste materials must be properly characterized. Further, disposal should be performed in accordance with the federal, state or local regulatory requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Medicinal products are exempt from the requirements of the EU Dangerous Preparations Directive. Information provided below is for the pure drug substance Heparin Sodium.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Heparin Lock Flush Solution, USP known by?
Heparin Lock Flush Solution, USP is also known as: Multi-Dose Fliptop Vials
What is the hazard signal word for Heparin Lock Flush Solution, USP?
The signal word is no signal word.
What is the physical form of Heparin Lock Flush Solution, USP?
Heparin Lock Flush Solution, USP is a liquid appearing as clear, colorless to practically colorless. with clear, colorless to practically colorless. color.