Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Maternal Screening Control, Level 1
- Product Code
- MSS5024
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
RANDOX Laboratories Ltd.
manufacturer
55 Diamond Road, Crumlin, Co. Antrim, United Kingdom, BT29 4QY
+44 (0) 28 9442 2413
www.randox.com
Emergency Contacts
Emergency Contact
+44 (0) 28 9442 2413
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The control in this kit contains material of human origin.
For in vitro diagnostic use only. Do not pipette by mouth. Handle laboratory reagents in accordance with Good Laboratory Practice.
Notes
Each donor used in the preparation of the materials was tested by an FDA approved method for the presence of HIV and HCV antibodies, and the hepatitis B antigen, and found to be non-reactive. Reagents should be handled with the same care as a clinical specimen.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If breathing becomes difficult, call a physician.
In case of skin contact immediately wash skin with soap and copious quantities of water.
Flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating eyelids with fingers. Call a physician.
If swallowed wash out mouth with water provided person is conscious, call a physician.
Immediate Medical Attention
Call a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Can use water, carbon dioxide, dry chemical or foam
Not known
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Treat material as you would human body fluids. Ventilate area and wash spill site after material pick up is complete.
autoclaving at 121°C for 20 min. prior to appropriate disposal with regard to local regulations. Alternatively, decontamination using a 0.1% solution of sodium hypochlorite is acceptable.
Materials: No restriction
Related Products
Similar products with comparable safety profiles
Maternal Screening Control, Level 2
---
Maternal Screening Control, Level 3
---
Rapid fFN Level 1 / Negative Control, Rapid fFN Level 2 / Positive Control
---
Liquichek™ Immunoassay Plus Control, Level 1
---
HSV 1 & 2 Positive Control
---
VitalScreen Reagent 1
---
PreciControl Rubella IgG
---
Positive Control/Internal Control/Standard
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The normal precautions for handling chemicals must be observed. Avoid inhalation. Avoid contact with skin and do not swallow.
Store at temperatures and conditions as indicated on the product label.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves (rubber or plastic)
Protective glasses
Laboratory coat
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Not determined
Not determined
None determined
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Maternal Screening Control, Level 1?
The signal word is no signal word.
What is the physical form of Maternal Screening Control, Level 1?
Maternal Screening Control, Level 1 is a lyophilised with pale yellow liquid when reconstituted color. It has odourless odor.
What is the melting point of Maternal Screening Control, Level 1?
The melting point is Not determined and the boiling point is Not determined.