Neonatal TSH Screening FLISA

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. After inhalation: fresh air. Call a physician.

Wash off with soap and plenty of water. Consult a physician. Take off immediately all contaminated clothing. Rinse skin with water / shower. Call a physician immediately.

Flush eyes with water as a precaution. Rinse out with plenty of water. Immediately call an ophthalmologist. Remove contact lenses.

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. If swallowed: give water to drink (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide (CO2).

There are no common extinguishing agents inappropriate.

Gentamicin Sulfate: Combustible. Development of hazardous combustion gases or vapours possible in the event of fire. ProClin 300: Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire.

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert

Do not let product enter drains.

Take up carefully. Dispose of properly. Clean up affected area. Take up with liquid-absorbent and neutralising material.

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595)

Work under hood. Do not inhale substance/mixture.

Tightly closed

General measures of preventive fire protection.

Full contact: gloves butyl-rubber, Minimum layer thickness: 0,3 mm, Break through time: 480 min, Material tested: Butoject® (KCL 897 / Aldrich Z677647). Splash contact: gloves nitrile rubber. Gentamicin Sulfate (CAS: 1405-41-0): Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril®. ProClin™ 300 (CAS-No: 55965-84-9): Nitrile rubber, Minimum layer thickness: 0,3 mm, Break through time: 480 min, Material tested: Butoject® (KCL 897 / Aldrich Z677647).

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses

The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

The product is chemically stable under standard ambient conditions (room temperature).

Gentamicin Sulfate: The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. ProClin 300: Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical.

violent reactions possible with strong oxidizing agents.

Gentamicin Sulfate (CAS: 1405-41-0): No information available; ProClin™ 300 (CAS-No: 55965-84-9): Strong heating

Gentamicin Sulfate: No information available; ProClin 300: Strong oxidizing agents, Reducing agents, Amines, Mercaptans

In the event of fire: see section 5.