NextSDS Logo
Safety Data Sheet EN

Sodium salicylate AnalaR NORMAPUR®

CAS 54-21-7

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sodium salicylate AnalaR NORMAPUR®
Product Code
28065
Chemical Name
Sodium salicylate

Regulatory Identifiers

CAS Number
54-21-7 Check regulations →
REACH No.
01-21119918289-28-XXXX

Identified Uses

General chemical reagent

Manufacturers & Suppliers

V

VWR International Ltd.

distributor

Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN

0800 22 33 44

V

VWR

Emergency Contacts

CareChem24

+44 (0) 1270 502894

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Eye Irrit. Cat. 2 H319
Repr. Cat. 2 H361d

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H319 Causes serious eye irritation.
H361d Suspected of damaging the unborn child.

Precautionary Statements

P201 Obtain special instructions before use.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Sodium salicylate 54-21-7 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.

Symptoms: skin reactions

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.

Immediate Medical Attention

obtain immediate medical attention

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.

Unsuitable media

no restriction

Specific hazards

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)

Instructions

DO NOT fight fire when fire reaches explosives. Use water spray jet to protect personnel and to cool endangered containers.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Clear spills immediately.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Clean contaminated articles and floor according to the environmental legislation.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid inhalation. Avoid contact with eyes and skin.

Storage

Keep container tightly closed and in a well-ventilated place.

Fire prevention

Usual measures for fire prevention.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 in the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381

Eyes

Eye glasses with side protection DIN-/EN-Norms DIN EN 166. Recommendation: VWR 111-0432

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Filtering Half-face mask (DIN EN 149). Recommendation: VWR 111-0451. Suitable material: P3. Recommendation: VWR 111-0244

Skin/Body

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

Environmental

no data available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
solid, white
Colour
white
Colour Intensity
---
Form
---
Odor
odourless
Odor Threshold
no data available
Ph
6.5 (100 g/l; H2O; 20 °C)
Melting Point
200 °C
Boiling Point
no data available
Flash Point
no data available
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
no data available
Vapor Pressure
no data available
Vapor Density
no data available
Relative Density
---
Bulk Density
no data available
Density
0.32 g/cm³ (20 °C)
Flammability
not applicable
Upper Explosive Limit
no data available
Lower Explosive Limit
no data available
Explosive Limits
---
Auto Ignition Temperature
> 250 °C
Decomposition Temperature
no data available
Solubility
---
Partition Coefficient
-1.43 (20 °C)
Solubility In Water
~1,000 g/l (20 °C)
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
no data available
Kinematic Viscosity
no data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

no data available

Hazardous reactions

no data available

Avoid

no data available

Incompatible

no data available

Decomposition

no data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sodium salicylate AnalaR NORMAPUR®?

The signal word is warning.

What is the physical form of Sodium salicylate AnalaR NORMAPUR®?

Sodium salicylate AnalaR NORMAPUR® is a solid appearing as solid, white with white color. It has odourless odor.

What is Sodium salicylate AnalaR NORMAPUR® used for?

General chemical reagent

What are the hazard statements for Sodium salicylate AnalaR NORMAPUR®?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • H361d: Suspected of damaging the unborn child.

What is the melting point of Sodium salicylate AnalaR NORMAPUR®?

The melting point is 200 °C and the boiling point is no data available.