Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur.
- Product Code
- 28244
Regulatory Identifiers
- CAS Number
- 1310-73-2 Check regulations →
- REACH No.
- 01-2119457892-27-XXXX
Identified Uses
General chemical reagent
Manufacturers & Suppliers
VWR International Ltd.
distributor
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substance name: Sodium hydroxide Molecular formula: NaOH Molecular weight: 40 g/mol CAS No.: 1310-73-2 REACH registration No.: 01-2119457892-27-XXXX INDEX No.: 011-002-00-6
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide | 1310-73-2 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.
Symptoms: corrosive injuries
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.
Immediate Medical Attention
Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.
no restriction
In case of fire may be liberated: Pyrolysis products, toxic
DO NOT fight fire when fire reaches explosives.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clear spills immediately.
Do not allow to enter into surface water or drains.
Clean contaminated articles and floor according to the environmental legislation.
Related Products
Similar products with comparable safety profiles
Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur.
CAS: 1310-73-2
Sodium hydrogen carbonate AnalaR NORMAPUR® Reag. Ph.Eur.
CAS: 144-55-8
Potassium hydroxide AnalaR NORMAPUR®
CAS: 1310-58-3
Sodium sulphate, anhydrous AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent
CAS: 7757-82-6
Sodium carbonate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 497-19-8
Sodium hydroxide Ph.Eur./NF/BP/JP Pellets
CAS: 1310-73-2
di-Sodium hydrogen phosphate, anhydrous AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 7558-79-4
Sodium hydroxide, pellets
CAS: 1310-73-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation. Avoid contact with eyes and skin. Protect from moisture.
Keep container tightly closed and in a well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): -, Recommended glove articles: VWR 112-1381. By long-term hand contact: Suitable material: Butyl caoutchouc (butyl rubber), Thickness of the glove material: 0,30 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3779
Eye glasses with side protection DIN-/EN-Norms: DIN EN 166 Recommendation: VWR 111-0432
Respiratory protection necessary at: aerosol or mist formation Suitable respiratory protection apparatus: Filtering Half-face mask (DIN EN 149) Recommendation: VWR 111-0451 Suitable material: P3 Recommendation: VWR 111-0244
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
Formation of explosive mixtures with: Metal, base, light metals. Formation of: Hydrogen. Violent reaction with: Acid, Oxidising agent, strong
no data available
Substance, organic, Metal
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1823
- Shipping Name
- SODIUM HYDROXIDE, SOLID
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur.?
The signal word is danger.
What is the physical form of Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur.?
Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur. is a solid appearing as solid, white with white color.
What is Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur. used for?
General chemical reagent
What are the hazard statements for Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur.?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Sodium hydroxide AnalaR NORMAPUR® pellets Reag. Ph. Eur.?
The melting point is 323 °C and the boiling point is 1390 °C (1013 hPa).