Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AL-FIX BLACK
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Adhesive, Sealing compound
Uses advised against
No uses advised against known
Manufacturers & Suppliers
Novatio
national supplier
Industrielaan 58, B-2250 Olen
+32 14 25 76 40
Novatech International N.V.
manufacturer
Industrielaan 58, B-2250 Olen
+32 14 85 97 37
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
EN, FR, DE, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethyl 2-cyanoacrylate EC: 230-391-5 | 7085-85-0 | 75 - 90% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim into fresh air. In case of respiratory problems, consult a doctor/medical service.
Symptoms: Irritation of the respiratory tract. Irritation of the nasal mucous membranes.
Do not pull surfaces apart with a direct opposing action. Immerse the bonded surfaces in warm, soapy water. Peel or roll surfaces apart with a blunt edge, e.g. spatula. Consult a doctor/medical service.
Symptoms: Tingling/irritation of the skin.
Do not try to open the eyes by manipulation. Wash thoroughly with warm water. Apply a moist gauze patch. Consult a doctor/medical service.
Symptoms: Irritation of the eye tissue.
Do not try to pull the lips with a direct opposing action. Apply lots of warm water and saliva. Immediately consult a doctor/medical service.
Symptoms: No effects known.
Immediate Medical Attention
Consult a doctor/medical service.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Small fire: Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting class B foam extinguisher, Quick-acting CO2 extinguisher. Major fire: Class B foam (not alcohol-resistant).
Small fire: Water (quick-acting extinguisher, reel); risk of puddle expansion. Major fire: Water; risk of puddle expansion.
On burning: release of toxic and corrosive gases/vapours (nitrous vapours, carbon monoxide - carbon dioxide). Polymerizes on exposure to water (moisture) and on exposure to temperature rise: pressure rise and possible bursting of container.
Dilute toxic gases with water spray. Take account of toxic/corrosive precipitation water.
Firefighter Protection
Gloves (EN 374). Face shield (EN 166). Protective clothing (EN 14605 or EN 13034). Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain released product.
Clean contaminated surfaces with an excess of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. Gas/vapour heavier than air at 20°C. Observe strict hygiene. Keep container tightly closed.
Store in a cool area. Store in a dry area. Keep out of direct sunlight. Keep container in a well-ventilated place. Keep only in the original container.
Observe strict hygiene.
Keep away from naked flames/heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from naked flames/heat. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Protective gloves against chemicals (EN 374). Materials: butyl rubber (>480 minutes, 0.7 mm, Class 6), viton (>480 minutes, Class 6).
Face shield (EN 166).
Full face mask with filter type A at conc. in air > exposure limit.
Protective clothing (EN 14605 or EN 13034).
See sections 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Temperature above flashpoint: higher fire/explosion hazard.
Polymerizes on exposure to water (moisture) and on exposure to temperature rise: pressure rise and possible bursting of container.
Keep away from naked flames/heat.
Oxidizing agents, (strong) bases.
On burning: release of toxic and corrosive gases/vapours (nitrous vapours, carbon monoxide - carbon dioxide).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 9003
- Shipping Name
- substances with a flash-point above 60 °C and not more than 100 °C
- Transport Class
- 9
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AL-FIX BLACK?
The signal word is warning.
What is the physical form of AL-FIX BLACK?
AL-FIX BLACK is a liquid with black color. It has characteristic odour odor.
What is the solubility of AL-FIX BLACK?
Water ; insoluble
What is AL-FIX BLACK used for?
Adhesive, Sealing compound
What are the hazard statements for AL-FIX BLACK?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of AL-FIX BLACK?
The melting point is No data available in the literature and the boiling point is No data available in the literature.