Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FLEXOCURE EBONY;BLACK FOR BACKING BLACK
- Product Code
- UFB80353408N
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Printing ink or Additive
Uses advised against
None known.
Manufacturers & Suppliers
Flint Group Netherlands BV
manufacturer
Duurstedeweg 14, 7418 CK Deventer, The Netherlands
Emergency Contacts
Emergency Contact
+31 653934281
8:00 h - 17:00 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propylidynetrimethanol, ethoxylated, esters with acrylic acid EC: 500-066-5 | 28961-43-5 | 10 - 25% | Yes |
| 2-propenoic acid, oxybis (methyl-2,1-ethanediyl) ester EC: 260-754-3 | 57472-68-1 | 10 - 25% | Yes |
| (1-methyl-1,2-ethanediyl)bis [oxy(methyl-2,1-ethanediyl)] diacrylate EC: 256-032-2 | 42978-66-5 | 10% | Yes |
| Aromatic urethane acrylate | --- | 5% | Yes |
| 2-benzyl-2-dimethylamino-4-morpholinobutyrophenone EC: 404-360-3 | 119313-12-1 | 5% | Yes |
| Siloxanes and Silicones, di-Me, hydrogen-terminated, reaction products with pentaerythritol tetraacrylate | 157811-87-5 | 3% | Yes |
| 2-Propenoic acid, reaction products with pentaerythritol | 1245638-61-2 | 3% | Yes |
| 2-ethylhexyl 4-(dimethylamino)benzoate EC: 244-289-3 | 21245-02-3 | 3% | Yes |
| acrylic acid, monoester with propane-1,2-diol EC: 247-118-0 | 25584-83-2 | 0.2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners. In case of accidental skin contact, avoid concurrent exposure to the sun or other sources of UV light which may increase the sensitivity of skin.
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Seek immediate medical attention/advice.
Get medical attention immediately. Call a poison center or physician. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Chemical burns must be treated promptly by a physician. Give nothing by mouth. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Immediate Medical Attention
Get medical attention immediately. Call a poison center or physician. Chemical burns must be treated promptly by a physician.
Medical Treatment
No specific treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol-resistant foam, CO₂, powders, water spray
Do not use water jet.
In a fire or if heated, a pressure increase will occur and the container may burst. This material is toxic to aquatic life with long lasting effects.
No action shall be taken involving any personal risk or without suitable training.
Firefighter Protection
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Do not breathe vapor or mist. Provide adequate ventilation.
If the product contaminates lakes, rivers, or sewers, inform the appropriate authorities in accordance with local regulations.
Preferably clean with a detergent. Avoid using solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Keep container tightly closed. Avoid contact with skin and eyes. Put on appropriate personal protective equipment (see Section 8). Comply with the health and safety at work laws.
Store in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10). Keep container tightly closed and in a well-ventilated place. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Remove contaminated clothing and protective equipment before entering eating areas. Workers should wash hands and face before eating, drinking and smoking. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.
Keep away from heat, sparks and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The data for this section has not been processed yet.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture contains materials which are unstable under the following conditions: exposure to heat strong UV sources
Not available.
Under normal conditions of storage and use, hazardous reactions will not occur.
exposure to heat, strong UV sources
Unintentional contact with them should be avoided.
When exposed to high temperatures may produce hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. ((1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)] diacrylate, 2-benzyl-2-dimethylamino-4-morpholinobutyrophenone)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FLEXOCURE EBONY;BLACK FOR BACKING BLACK?
The signal word is danger.
What is the physical form of FLEXOCURE EBONY;BLACK FOR BACKING BLACK?
FLEXOCURE EBONY;BLACK FOR BACKING BLACK is a liquid. with black. color. It has characteristic. odor.
What is the solubility of FLEXOCURE EBONY;BLACK FOR BACKING BLACK?
insoluble in water.
What is FLEXOCURE EBONY;BLACK FOR BACKING BLACK used for?
Printing ink or Additive
What are the hazard statements for FLEXOCURE EBONY;BLACK FOR BACKING BLACK?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of FLEXOCURE EBONY;BLACK FOR BACKING BLACK?
The melting point is Not available. and the boiling point is >= 100 °C.