NextSDS Logo
Safety Data Sheet EN

GALVATRON

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GALVATRON

Regulatory Identifiers

CAS Number
N/A
REACH No.
Not applicable (mixture)

Identified Uses

Coating, Paint

Uses advised against

No uses advised against known

Manufacturers & Suppliers

N

Novatio

national supplier

Industrielaan 58, B-2250 Olen

+32 14 25 76 40

N

Novatech International N.V.

manufacturer

Industrielaan 58, B-2250 Olen

+32 14 85 97 37

Emergency Contacts

BIG

+32 14 58 45 45

24h/24h

EN, FR, DE, NL

Ireland - Beaumont Hospital, Dublin (NPIC)

+353 1 809 2166

8 am- 10 pm

Ireland - Beaumont Hospital, Dublin (NPIC)

+353 1 809 2566

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P280 Wear eye protection.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122°F.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
dimethyl ether EC: 204-065-8 115-10-6 25 - 50% Yes
zinc powder - zinc dust (stabilised) EC: 231-175-3 7440-66-6 25 - 50% Yes
acetone EC: 200-662-2 67-64-1 10 - 25% Yes
hydrocarbons, C9, aromatics EC: 918-668-5 128601-23-0 2.5 - 10% Yes
reaction mass of ethylbenzene and xylene EC: 905-588-0 --- 2.5 - 10% Yes
propan-2-ol EC: 200-661-7 67-63-0 1 - 2.5% Yes
xylene EC: 215-535-7 1330-20-7 1 - 2.5% Yes
ethylbenzene EC: 202-849-4 100-41-4 0.1 - 1% Yes
lead powder;[particle diameter < 1 mm] EC: 231-100-4 7439-92-1 0.0025 - 0.025% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim into fresh air. In case of respiratory problems, consult a doctor/medical service.

Symptoms: Dizziness. Drowsiness.

Skin contact

If possible, wipe up/dry remove chemical. Then rinse/shower immediately with (lukewarm) water. If irritation persists, consult a doctor/medical service.

Symptoms: ON CONTINUOUS EXPOSURE/CONTACT: Dry skin. Cracking of the skin.

Eye contact

Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, consult a doctor/medical service.

Symptoms: Irritation of the eye tissue.

Ingestion

Rinse mouth with water. If you feel unwell, consult a doctor/medical service. Do not wait for symptoms to occur to consult Poison Center.

Symptoms: No effects known.

Immediate Medical Attention

In case of injury and/or intoxication, call the European emergency number 112. Consult a doctor/medical service for respiratory problems, persistent irritation, or if you feel unwell after ingestion. Do not wait for symptoms to occur to consult Poison Center.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Small fire: Water, Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting CO2 extinguisher. Major fire: Quantities of water.

Specific hazards

Upon combustion CO and CO2 are formed and formation of metal oxides. Pressurised container: May burst if heated.

Instructions

If exposed to fire cool the closed containers by spraying with water. Physical explosion risk: extinguish/cool from behind cover. Do not move the load if exposed to heat. After cooling: persistent risk of physical explosion.

Firefighter Protection

Gloves (EN 374). Protective goggles (EN 166). Protective clothing (EN 1460S or EN 13034). Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop engines and no smoking. No naked flames or sparks. Exposure to fire/heat: keep upwind. Exposure to fire/heat: have neighbourhood close doors and windows.

Environmental

Contain released product. Dam up the liquid spill. Prevent soil and water pollution. Prevent spreading in sewers.

Cleanup methods

Carefully collect the spill/leftovers. Clean contaminated surfaces with an excess of water.

Materials: absorbent material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Gas/vapour heavier than air at 20°C. Avoid prolonged and repeated contact with skin.

Storage

< 50 °C. Meet the legal requirements. Keep container in a well-ventilated place. Fireproof storeroom. Keep out of direct sunlight.

Hygiene

Observe normal hygiene standards.

Fire prevention

Keep away from naked flames/heat. Keep away from ignition sources/sparks.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Measure the concentration in the air regularly.

Hands

Protective gloves against chemicals (EN 374). Materials: nitrile rubber, Measured breakthrough time: >480 minutes, Thickness: 0.5 mm, Protection index: Class 6

Eyes

Protective goggles (EN 166).

Respiratory

Full face mask with filter type A at conc. in air > exposure limit.

Skin/Body

Protective clothing (EN 14605 or EN 13034).

Environmental

See sections 6.2, 6.3 and 13

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour
Grey
Colour Intensity
---
Crystallisation Point
---
Solidification Point
---
Physical State
Aerosol
Bulk Density
---
Flash Point
Not applicable (aerosol)
Upper Explosive Limit
13 vol %
Solubility In Water
insoluble
Cloud Point
---
Odor
Characteristic odour
Partition Coefficient
Not applicable (mixture)
Solubility In Fat
---
Molecular Weight
---
State Under Standard Conditions
---
Vapor Pressure
5000 hPa ; 20 °C ; Propellant
Relative Evaporation Rate
---
Solubility
---
Odor Threshold
No data available in the literature
Form
---
Physical State Data
aerosol
Voc Content
---
Appearance
---
Lower Explosive Limit
1 vol %
Freezing Point
---
Kinematic Viscosity
Not applicable (aerosol)
Metal Corrosion
---
Melting Point
Not applicable (aerosol)
Flammability
Extremely flammable aerosol.
Boiling Point
Not applicable (aerosol)
Vapor Density
---
Evaporation Rate
---
Relative Density
1.04 ; 20 °C
Decomposition Temperature
No data available in the literature
Density
1042 kg/m³ ; 20 °C
Explosive Limits
---
Auto Ignition Temperature
Not applicable (aerosol)
Ph
Not applicable (aerosol)
Softening Point
---
Dynamic Viscosity
Not applicable (aerosol)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

May be ignited by sparks. Gas/vapour spreads at floor level: ignition hazard.

Hazardous reactions

No data available.

Avoid

Use spark-/explosionproof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks.

Incompatible

No data available.

Decomposition

Upon combustion CO and CO2 are formed and formation of metal oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
aerosols
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GALVATRON?

The signal word is danger.

What is the physical form of GALVATRON?

GALVATRON is a aerosol with grey color. It has characteristic odour odor.

What is GALVATRON used for?

Coating, Paint

What are the hazard statements for GALVATRON?

This substance has 5 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of GALVATRON?

The melting point is Not applicable (aerosol) and the boiling point is Not applicable (aerosol).