Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Silicone Viscosity Standards
- Product Code
- 9727-Z10, 9727-Z14, 9727-Z18, 9727-Z22, 9727-Z26, 9727-Z30, 9727-Z34, 9727-Z38, 9727-Z42, 9727-Z46, 9727-Z50
- Synonyms
- RT5, RT10, RT50, RT100, RT500, RT1000, RT5000, RT12500, RT30000, RT60000, RT100000, Dow Corning 200® Fluids
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Rotational viscometer viscosity calibration standards
Manufacturers & Suppliers
Cannon Instrument Company
manufacturer
2139 High Tech Road, State College, Pennsylvania 16803
(814) 353-8000
Emergency Contacts
CHEM-TEL Inc.
(800) 255-3924
CHEM-TEL Inc.
+1 (813) 248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
None present. This is not a hazardous substance as defined in the OSHA Hazard Communication Standard
First Aid Measures
Emergency procedures for chemical exposure incidents
No first aid should be needed
No first aid should be needed
Immediately flush with water
No first aid should be needed
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
On large fires, use dry chemical, foam or water spray. On small fires, use carbon dioxide (CO2), dry chemical or water spray. Water can be used to cool fire exposed containers
Unusual fire hazards: None identified
Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Determine the need to evacuate or isolate the area according to your local emergency plan. Use water spray to keep the exposed containers cool.
Firefighter Protection
Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Determine whether to evacuate or isolate the area according to your local emergency plan.
For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in an appropriate container.
Clean up remaining materials from spill with suitable absorbent. Clean area as appropriate. Final cleaning may require the use of steam, solvents or detergents.
Materials: suitable absorbent
Related Products
Similar products with comparable safety profiles
Silicone Viscosity Standards (5 cSt to 100,000 cSt)
---
General Purpose Viscosity Standards
---
General Purpose Viscosity Standards
---
Viscosity Reference Standard General Purpose Type S3, UKAS ISO 17025 / ISO 17034, 500 mL / AP Dual-branded
UFI: HJ25-X0AK-600X-NY9E
General Purpose Viscosity Standard – Synthetic Base Oil
---
Viscosity Reference Standard General Purpose Type N415, UKAS ISO 17025 / ISO 17034, 500 mL / AP Dual-branded
---
Viscosity Reference Standard General Purpose Type N26, UKAS ISO 17025 / ISO 17034, 500 mL / AP Dual-branded
UFI: KH45-K06Q-800A-VTPW
Viscosity Reference Standard General Purpose Type N7.5, UKAS ISO 17025 / ISO 17034, 500 mL / AP Dual-branded
UFI: A095-W03C-6002-8K08
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use with adequate ventilation
Use reasonable care and store away from oxidizing materials
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation is recommended. No local exhaust ventilation should be needed
No special protection needed
Use proper protection – safety glasses as a minimum
No respiratory protection should be needed
Any specific clothing information provided is based on published literature or manufacturer data. The types of clothing to be considered for this material include:
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Hazardous polymerization will not occur
Oxidizing materials can cause a reaction
Formaldehyde may be formed at elevated temperatures. See section 6.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Silicone Viscosity Standards known by?
Silicone Viscosity Standards is also known as: RT5, RT10, RT50, RT100, RT500, RT1000, RT5000, RT12500, RT30000, RT60000, RT100000, Dow Corning 200® Fluids
What is the hazard signal word for Silicone Viscosity Standards?
The signal word is no signal word.
What is the physical form of Silicone Viscosity Standards?
Silicone Viscosity Standards is a liquid appearing as colorless with colorless color. It has odorless (lower viscosity grades) to characteristic odor odor.
What is Silicone Viscosity Standards used for?
Rotational viscometer viscosity calibration standards
What is the melting point of Silicone Viscosity Standards?
The melting point is not available and the boiling point is >35 °C (>95 °F) to >273 °C (>523 °F) for 100,000 cSt grade.