Coastal DexMerc Automatic Transmission Fluid

Remove to fresh air. If not breathing, give artificial respiration, preferably mouth to mouth. If breathing is difficult give oxygen. Get medical attention.

Symptoms: Inhalation of oil mists or fumes can cause irritation of the nose, throat and upper respiratory tract. Repeated and prolonged overexposure to oil mists may result in droplet deposition, oil granuloma formation, inflammation and increased incidence of infection.

No treatment is necessary under ordinary circumstances. Remove contaminated clothing. Wash contaminated area thoroughly with soap and water. If redness or irritation occurs and persists, seek medical attention. WARNING: Oil injected into the skin from high pressure leaking hydraulic systems can cause severe damage. Most damage occurs during the first few hours. Seek medical attention immediately. Surgical removal of oil may be necessary.

Symptoms: This product may cause irritation to the skin. Prolonged and/or repeated skin contact with this product may cause irritation/dermatitis.

IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping eyelids open. Seek medical attention.

Symptoms: This product is irritating to the eyes.

If swallowed, DO NOT induce vomiting because of danger of aspirating liquid into lungs. Seek medical attention.

Dry chemical, foam, carbon dioxide, water fog.

Not determined.

Direct water spray or foam may cause frothing and spattering.

Use water to cool fire-exposed containers and to protect personnel.

Persons not wearing protective equipment should be excluded from area of spill until cleanup has been completed.

See Section 12 for additional Ecological Information.

Absorb with non-flammable suitable absorbent such as sand or earth. Scoop up used absorbent into drums or other appropriate container.

Materials: non-flammable suitable absorbent such as sand or earth

Avoid getting this material into contact with your eyes. Avoid prolonged or repeated skin contact with this material. Avoid the generation of oil mists. Wash thoroughly after handling. Use this product with adequate ventilation.

Do not store near heat, sparks, open flame or strong oxidizing agents. Do not store this material in open or unlabeled containers. "Empty" containers retain product residue (liquid and/or vapor) and can be dangerous.

Wash thoroughly after handling.

Do not store near heat, sparks, open flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition.

Use general ventilation and use local exhaust, where possible, in confined or enclosed spaces. If product is heated above 70 C (155 F) in the presence of water, hydrogen sulfide vapors may be released. Ventilation should be sufficient to keep hydrogen sulfide levels below recommended exposure limits.

Use impervious gloves for prolonged contact.

Wear safety glasses. Wear chemical goggles or face shield if splash or mist occurs.

If mist is generated (heating, spraying) and engineering controls are not sufficient, wear approved organic vapor respirator suitable for oil mist.

Wear oil-impervious garments if contact is unavoidable.

Stable under recommended storage conditions.

Not reactive under normal conditions.

None under normal processing. Under normal conditions of storage and use, hazardous polymerization will not occur.

Avoid formation of mists.

This product may react with strong oxidizing agents.

Decomposition of this product may yield oxides of boron, calcium, magnesium, nitrogen, phosphorus, sulfur including hydrogen sulfide and zinc as well as carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.