NextSDS Logo
Safety Data Sheet EN

GPE GASKETS

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GPE GASKETS
Chemical Name
Fiberglass paper

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

I

INSULCON B.V.

manufacturer

P.O. Box 134, 4650 AC STEENBERGEN, The Netherlands; Zilverhoek 4, 4651 SP STEENBERGEN

+31 (0)167-565750

K

KERAMAB N.V.

manufacturer

+32 (0)3 711.02.78

I

INSULCON GMBH

manufacturer

+49 (0) 2162 249 60-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

See section 8 of MSDS for the data on the exposure limits. GPE Paper is coated with a specially developed GPE coating, to manufacture gastight plastic elastic gasket. All Gaskets are manufactured in our own production facility in the Netherlands.

Chemical Name CAS Number Concentration Hazardous
Chopped Continuous Strand Fiberglass 65997-17-3 90 - 95% No
Hydrocarbon Binder 25957-70-6 4% No
Polyvinyl Alcohol 9002-89-5 3 - 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air.

Symptoms: irritation

Skin contact

Rinse contacted areas with room temperature to cool water, then wash gently mild soap & water.

Eye contact

Flush eyes with clear water for at least 15 minutes.

Ingestion

If it does occur watch for several days to make sure intestinal blockage does not occur.

Symptoms: intestinal blockage

Immediate Medical Attention

If fiberglass becomes imbedded, seek medical attention. Seek medical attention if irritation persists. If there is blockage seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, foam, carbon dioxide or water spray.

Specific hazards

Hazardous decomposition products of combustion from sizing and binders may be released in a sustained fire. The larger part of the product is non-flammable fibreglass.

Instructions

In a sustained fire, self-contained breathing apparatus, (SCBA), should be worn.

Firefighter Protection

In a sustained fire, self-contained breathing apparatus, (SCBA), should be worn.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wet, sweep or vacuum fibrous dust.

Cleanup methods

Wet, sweep or vacuum fibrous dust.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep airborne dust concentrations below regulated levels.

Storage

Store in original packaging in dry area whilst awaiting use.

Fire prevention

Can accumulate static charge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Local exhaust ventilation (if needed) to maintain appropriate airborne dust levels.

Hands

gloves

Eyes

Safety glasses with side shields or goggles

Respiratory

Some applications of these products may not require respiratory protection for fibreglass. However, if airborne glass concentrations exceed the OSHA permissible limits or if irritation occurs, a properly fitted NIOSH/MSHA approved disposable dust respirator such as the 3M model 8210 (formerly 8710) or model 9900 (in high humidity environments) or equivalent should be used. Use respiratory protection in accordance with your company's respiratory protection program, local regulations and OSHA regulations under CFR 1910.134.

Skin/Body

Loose fitting long sleeved shirt that covers to the base of the neck, long pants and gloves. Skin irritation is known to occur chiefly at pressure points such as around neck, wrist, waist and between fingers.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
---
Flash Point
---
Flammability
---
Colour
Grey - Black.
Decomposition Temperature
---
Physical State
Solid
Ph
---
Physical State Data
solid
Metal Corrosion
---
Dynamic Viscosity
---
Boiling Point
---
Properties Status
---
Solubility In Fat
---
Kinematic Viscosity
---
Freezing Point
---
Voc Content
---
Softening Point
---
State Under Standard Conditions
---
Vapor Density
---
Density
---
Vapor Pressure
---
Evaporation Rate
---
Relative Evaporation Rate
---
Molecular Weight
---
Upper Explosive Limit
---
Partition Coefficient
---
Odor Threshold
---
Appearance
---
Explosive Limits
---
Relative Density
---
Solubility
---
Crystallisation Point
---
Odor
---
Solubility In Water
---
Auto Ignition Temperature
---
Colour Intensity
---
Solidification Point
---
Bulk Density
---
Cloud Point
---
Melting Point
---
Form
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of use and storage

Hazardous reactions

Will not occur

Incompatible

Strong Acids

Decomposition

None known. Combustion products from organic binder may include carbon monoxide, carbon dioxide, nitrogen oxides & various hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GPE GASKETS?

The signal word is no signal word.

What is the physical form of GPE GASKETS?

GPE GASKETS is a solid with grey - black. color.