Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HT Instant Gasket - Black
- Product Code
- 0458
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 0DE0-U0CT-300S-K1HV
Identified Uses
PC1 Adhesives, sealants
Uses advised against
Not known.
Manufacturers & Suppliers
Granville Oil & Chemicals Ltd
manufacturer
29 Goldthorpe Ind. Est., Goldthorpe, Rotherham, South Yorkshire, S63 9BL
+44 (0)1709 890099
Veedol Deutschland GmbH
Hans-Böckler-Straße 10 Langenfeld, Germany, 40764
+49 (0) 2173 893 30 30
Emergency Contacts
Granville Lab
+44 (0)1709 890099
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quartz (SiO2) EC: 238-878-4 | 14808-60-7 | 25 - 74.99% | No |
| 2-Propanone, 2,2',2''-[O,O',O''-(ethylsilylidyne)trioxime] | 58190-57-1 | 1 - 9.99% | Yes |
| 3-aminopropyltriethoxysilane EC: 213-048-4 | 919-30-2 | 0.1 - 0.99% | Yes |
Contains no non-classified vPvB substances. Contains a non-classified substance with a Union workplace exposure limit. Silica, respirable crystalline (respirable fraction) (14808-60-7)
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Wash skin with water.
Remove contact lenses, if present and if it is easy to do. Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling eyelids up and seek medical assistance.
Do NOT induce vomiting.
Immediate Medical Attention
In case of doubt or when symptoms of feeling unwell persist, get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguisher powder or CO2. In case of more serious fires, also alcohol-resistant foam and water spray.
Do not use a direct stream of water to extinguish. In the presence of electrical voltage, you cannot use water or foam as extinguishing media.
None anticipated. Heating may cause decomposition.
Use water to cool tanks, cisterns, or containers close to the heat source or fire. Take wind direction into account.
Firefighter Protection
According to the size of the fire, it may be necessary to use protective suits against the heat, individual breathing equipment, gloves, protective goggles or facemasks, and boots.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For exposure control and individual protection measures, see section 8.
Product not classified as hazardous for the environment, avoid spillage as much as possible.
clean the area immediately with a suitable decontaminant
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The product does not require special handling measures, the following general measures are recommended: For personal protection, see section 8. In the application area, smoking, eating, and drinking must be prohibited. Follow legislation on occupational health and safety. Never use pressure to empty the containers. They are not pressure-resistant containers. Keep the product in containers made of a material identical to the original.
Store the containers between 5 and 25 º C, in a dry and well-ventilated place.
In the application area, smoking, eating, and drinking must be prohibited.
sources of heat, radiation, electricity should be avoided.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation, which can be achieved by using good local exhaust-ventilation and a good general exhaust system.
Wear eye protection with side protection (EN166).
Normally no personal respiratory protection is necessary.
EN 374-1, EN 374-2, EN 374-3, EN 420
Do not release large quantities into the surface water or into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None anticipated.
No hazardous reactions known if used for its intended purpose.
None anticipated.
Keep away from oxidising agents and from highly alkaline or acidic materials in order to prevent exothermic reactions.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HT Instant Gasket - Black?
The signal word is no signal word.
What is the physical form of HT Instant Gasket - Black?
HT Instant Gasket - Black is a solid with black/ grey color. It has characteristic odour odor.
What is HT Instant Gasket - Black used for?
PC1 Adhesives, sealants
What is the melting point of HT Instant Gasket - Black?
The melting point is < -50 and the boiling point is >250 ºC.