NextSDS Logo
Safety Data Sheet EN

GPE CB GASKETS

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GPE CB GASKETS

Regulatory Identifiers

CAS Number
N/A

Identified Uses

thermal insulation

Uses advised against

No data available

Manufacturers & Suppliers

INSULCON B.V. logo

INSULCON B.V.

Zilverhoek 4 4651 SP STEENBERGEN, The Netherlands

+31 (0)167-565750

http://www.insulcon.com

I

INSULCON N.V.

Belgium

+32 (0)3 711.02.78

I

INSULCON GMBH

Germany

+49 (0) 2131-408548-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Fiber glass substance with national workplace exposure limit(s) (BE) EC: 266-046-0 65997-17-3 50.2 - 54.3% No
Polydimethylsiloxan substance with national workplace exposure limit(s) (RO) EC: 618-493-1 9016-00-6 24.4 - 28% No
Calcium carbonate EC: 207-439-9 471-34-1 7 - 8% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Inhalation of dust may cause irritation of the respiratory system.

Skin contact

Take off contaminated clothing. Gently wash with plenty of soap and water. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Contact with dust may cause mechanical irritation or drying of the skin.

Eye contact

Rinse immediately carefully and thoroughly with eye-bath or water. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Dust contact with the eyes can lead to mechanical irritation.

Ingestion

Rinse mouth thoroughly with water. Get medical advice/attention.

Symptoms: Corrosion or irritation of the linings of the mouth, throat, and gastrointestinal tract.

Immediate Medical Attention

In case of doubt or persistent symptoms, consult always a physician. Get medical advice/attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

carbon dioxide (CO2), powder, alcohol-resistant foam, hazy water.

Unsuitable media

Strong water jet.

Specific hazards

Not flammable. Potential dust explosion hazard.

Instructions

Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire-fighting water from entering environment. Knock down dust with water spray jet.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Wear recommended personal protective equipment. Do not breathe dust. Avoid contact with skin, eyes and clothing. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ensure equipment is adequately grounded. Use explosion-proof equipment. Use only non-sparking tools. Ensure procedures and training for emergency decontamination and disposal are in place.

Large spill

Large spills: scoop solid spill into closing containers.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Stop leak if safe to do so. Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide adequate ventilation. Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Do not breathe dust. Avoid contact with skin, eyes and clothing. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Avoid release to the environment. Avoid dust formation. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use explosion-proof equipment. Use only non-sparking tools.

Storage

Store in a dry, cool and well-ventilated place. Do not store near or with any of the incompatible materials listed in section 10. Keep the packing dry and well-sealed to prevent contamination and absorption of humidity. Relative air humidity (%) (<65%).

Hygiene

Keep good industrial hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothes. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Organizational measures to prevent /limit releases, dispersion and exposure. Safe handling: see section 7. Apply measures to prevent dust explosions. Ensure equipment is adequately grounded.

Hands

Wear chemically resistant gloves (tested to EN374). Suitable material: The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances

Eyes

Use suitable eye protection. (EN166): Eye glasses with side protection

Respiratory

Not required for normal conditions of use. In case of insufficient ventilation, wear suitable respiratory equipment. Effective dust mask (EN 149). Half-face mask (EN 140). Full face mask (EN 136). Filter type: P (EN 143)

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment. Comply with applicable Community environmental protection legislation.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Decomposition Temperature
200 °C
Solidification Point
---
Physical State
Solid
Ph
Not applicable
Upper Explosive Limit
---
Cloud Point
---
Flammability
No data available
Odor
odourless.
Crystallisation Point
---
Softening Point
---
Kinematic Viscosity
No data available
Colour
red.
Solubility In Fat
---
Lower Explosive Limit
---
Partition Coefficient
No data available
Molecular Weight
---
Solubility In Water
---
Vapor Pressure
No data available
Solubility
Water: Insoluble
Voc Content
---
Form
---
Relative Density
No data available
State Under Standard Conditions
---
Appearance
Dust. solid.
Physical State Data
solid
Odor Threshold
No data available
Relative Evaporation Rate
No data available
Evaporation Rate
---
Auto Ignition Temperature
No data available
Properties Status
---
Flash Point
232 °C
Freezing Point
No data available
Density
---
Melting Point
>650 °C Fiber glass
Colour Intensity
---
Explosive Limits
---
Dynamic Viscosity
No data available
Bulk Density
---
Boiling Point
---
Metal Corrosion
---
Vapor Density
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Reference to other sections: 10.4 & 10.5.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

Safe handling: see section 7.

Incompatible

Strong acids.

Decomposition

Reference to other sections: 5.2.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GPE CB GASKETS?

The signal word is no signal word.

What is the physical form of GPE CB GASKETS?

GPE CB GASKETS is a solid appearing as dust. solid. with red. color. It has odourless. odor.

What is the solubility of GPE CB GASKETS?

Water: Insoluble

What is GPE CB GASKETS used for?

thermal insulation

What is the melting point of GPE CB GASKETS?

The melting point is >650 °C Fiber glass .