Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Gasketseal
- Product Code
- 103460
- Synonyms
- Red - 310 mL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Professional use Consumer use Sealant
Manufacturers & Suppliers
Soudal Pty Ltd
manufacturer
75 Owen St Glendenning NSW 2761 Australia
1300 507 011
Emergency Contacts
Emergency Contact
1300 507 011
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Triacetoxyethylsilane | 17689-77-9 | 1 - 5% | No |
| Ingredients determined to be Non-Hazardous | --- | --- | No |
100%
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.
Symptoms: swelling, redness, blistering or irritation
If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek medical advice.
Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice.
Immediate Medical Attention
Seek medical advice if effects persist (inhalation), seek medical assistance (skin), seek medical advice (eye), seek medical advice (ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
If material is involved in a fire use water fog (or if unavailable fine water spray), alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder).
Non-combustible material.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents, clean up immediately.
Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours or dust. Wipe up with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or drums for disposal.
Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye contamination and the inhalation of dust. Work up wind or increase ventilation. Cover with damp absorbent (inert material, sand or soil). Sweep or vacuum up, but avoid generating dust. Collect and seal in properly labelled containers or drums for disposal. If contamination of crops, sewers or waterways has occurred advise local emergency services.
If contamination of crops, sewers or waterways has occurred advise local emergency services.
Wipe up with absorbent (clean rag or paper towels). Sweep or vacuum up, but avoid generating dust.
Materials: absorbent (clean rag or paper towels), damp absorbent (inert material, sand or soil)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of dust.
Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition. Keep container standing upright. Keep containers closed when not in use - check regularly for spills.
Store away from foodstuffs.
Store away from sources of heat and/or ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Natural ventilation should be adequate under normal use conditions.
Wear overalls, gloves, safety glasses. Available information suggests that gloves made from should be suitable for intermittent contact. However, due to variations in glove construction and local conditions, the user should make a final assessment.
Wear overalls, gloves, safety glasses.
Wear overalls, gloves, safety glasses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This material is thermally stable when stored and used as directed.
No known hazardous reactions.
Elevated temperatures and sources of ignition.
Oxidising agents.
Oxides of carbon and nitrogen, smoke and other toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Gasketseal known by?
Gasketseal is also known as: Red - 310 mL
What is the hazard signal word for Gasketseal?
The signal word is no signal word.
What is the physical form of Gasketseal?
Gasketseal is a paste with variable in colour, depending on the composition color. It has vinegar odour odor.
What is Gasketseal used for?
Professional use Consumer use Sealant
What is the melting point of Gasketseal?
The melting point is N av and the boiling point is N Av.