Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fumed Silicia Suspension wasserfrei
- Product Code
- OxyPol009/010
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sample preparation for metallography
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Cloeren Technology GmbH
manufacturer
In Petersholz 44, D-41844 Wegborg
02432/8902510
Emergency Contacts
Toxin emergency call
+49 (0)30 19240
24 hours
EN, DE
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanediol EC: 203-473-3 | 107-21-1 | 30% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately rinse with water.
Rinse opened eye for several minutes under running water.
Call for a doctor immediately. Rinse out mouth and then drink plenty of water.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required
Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Fumed Silicia Suspension 0,2 μm anhydrous
---
Orisil M130, M200, M300, hydrophobic fumed Silica
---
Silica gel
CAS: 112926-00-8
Silica gel
CAS: 7631-86-9
Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica
CAS: 7631-86-9 112945-52-5
Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica
CAS: 7631-86-9, 112945-52-5
Silica gel orange
CAS: 112926-00-8
Sodium silicate solution
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The usual precautions when handling chemicals should be taken.
Store only in the original receptacle.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fumed Silicia Suspension wasserfrei?
The signal word is no signal word.
What is the physical form of Fumed Silicia Suspension wasserfrei?
Fumed Silicia Suspension wasserfrei is a fluid appearing as fluid with white color. It has sweetish odor.
What is Fumed Silicia Suspension wasserfrei used for?
Sample preparation for metallography
What is the melting point of Fumed Silicia Suspension wasserfrei?
The melting point is Undetermined. and the boiling point is 198 °C.