Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica
Regulatory Identifiers
- CAS Number
- 7631-86-9, 112945-52-5 Check regulations →
- EC Number
- 231-545-4 Check regulations →
- REACH No.
- 01-2119379499-16-0109
Identified Uses
Auxiliary, Lacquer, Rubber, Plastic additive, Cosmetic auxiliary, Cosmetics, personal care products
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Orisil, Ltd.
manufacturer
Chornovil Avenue, 45A, Building 5, 79019 Lviv, Ukraine
+38 032 297 12 19
DK Orisil Plant, Ltd.
manufacturer
Zavodska Street, 12, 77300 Kalush, Ukraine
Chemservice GmbH
Herrnsheimer Hauptstrasse 1b, D-67550 Worms, Germany
+49 6241-95480-0
Emergency Contacts
Orisil, Ltd.
+38 032 297 12 19
8:30-17.00 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| silicon dioxide, chemically prepared EC: 231-545-4 | 7631-86-9 | --- | No |
INCI Name: SILICA Nanoform non-surface-treated nanoforms Shape: Spheroidal Crystallinity: amorphous nanoform
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Rinse opened eye for several minutes under running water. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse mouth.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow product to reach sewage system or any water course.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica
CAS: 7631-86-9 112945-52-5
Orisil M130, M200, M300, hydrophobic fumed Silica
---
Fumed Silicia Suspension 0,2 μm anhydrous
---
Silica gel orange
CAS: 112926-00-8
Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT SODIUM SILICATE 3Na
---
1H,1H,2H,2H-Perfluorooctylmethyldichlorosilane
CAS: 73609-36-6
AEROSIL® 200
CAS: 112945-52-5, 7631-86-9
Amorphous Silica
CAS: 112945-52-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of dust. Any unavoidable deposit of dust must be regularly removed.
Store only in the original receptacle. Protect from humidity and water. Protect from contamination. Store in cool, dry conditions in well sealed receptacles.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Butyl rubber, BR, Nitrile rubber, NBR, PVC gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Use suitable respiratory protective device in case of insufficient ventilation.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No specific incompatible materials known.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica?
The signal word is no signal word.
What is the physical form of Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica?
Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica is a solid with white color. It has odourless odor.
What is Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica used for?
Auxiliary, Lacquer, Rubber, Plastic additive, Cosmetic auxiliary, Cosmetics, personal care products
What is the melting point of Orisil 150, 200, 300, 380, hydrophilic amorphous fumed silica?
The melting point is > 1700 °C and the boiling point is 2230 °C.