Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fumed Silicia Suspension 0,2 μm anhydrous
- Product Form
- Mixture
- Product Code
- Oxypol009/010
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sample preparation for metallography
Uses advised against
No additional information available
Manufacturers & Suppliers
Cloeren Technology GmbH
manufacturer
In Petersholz 44, DE- 41844 Wegberg, Germany
02432/8902510
http://www.cloeren.de
Emergency Contacts
Giftinformationszentrum-Nord der Länder Bremen, Hamburg, Niedersachsen und Schleswig-Holstein (GIZ-Nord) Universitätsmedizin Göttingen - Georg-August-Universität
+49 (0) 551 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with harmless additives
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Monoethylenglykol EC: 203-473-3 | 107-21-1 | 30% | Yes |
| silica EC: 231-545-4 | 7631-86-9 | --- | No |
Notes
Mixture of the substances listed below with harmless additives. Product contains nanoparticles
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water.
Rinse eyes with water as a precaution.
Rinse mouth. Call a poison center or a doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Do not breathe dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Related Products
Similar products with comparable safety profiles
Sodium metasilicate, anhydrous
CAS: 6834-92-0
Silica gel FIA coarse 0,071-0,63 mm, 1
---
Silica gel
CAS: 7631-86-9
Silica gel
CAS: 112926-00-8
Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)
CAS: 7631-86-9
Silica gel orange
CAS: 112926-00-8
Sulfonic Acid Bonded Silica Gel (Column)
---
Calcium Sulfate Anhydrous
CAS: 7778-18-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment. Do not breathe dust/fume/gas/mist/vapours/spray.
Store in a closed container.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
The glove material must be impermeable and resistant to the product / the substance / the be preparation. Selection of the glove material taking into account the penetration times, permeation rates and the Degradation. Recommendation: uvex u-chem 3000 (DIN EN 374) Material: nitrile rubber Material thickness: 0.5 mm Value for the permeation: > 120 min (level 4) Recommendation: uvex u-fit strong N2000 (DIN EN 374) Material: nitrile rubber Material thickness: 0.2 mm Value for the permeation: > 30 min (level 2)
Safety goggles recommended during refilling
Ensure adequate ventilation or use a fume cupboard. No respiratory protection is required with normal use.
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fumed Silicia Suspension 0,2 μm anhydrous?
The signal word is warning.
What is the physical form of Fumed Silicia Suspension 0,2 μm anhydrous?
Fumed Silicia Suspension 0,2 μm anhydrous is a liquid with white. color. It has perceptible. odor.
What is the solubility of Fumed Silicia Suspension 0,2 μm anhydrous?
soluble in water.
What is Fumed Silicia Suspension 0,2 μm anhydrous used for?
Sample preparation for metallography
What are the hazard statements for Fumed Silicia Suspension 0,2 μm anhydrous?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of Fumed Silicia Suspension 0,2 μm anhydrous?
The melting point is -13 °C and the boiling point is 198.