Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Flowshield LXP HD Filler C
Regulatory Identifiers
- CAS Number
- 14808-60-7 Check regulations →
- REACH No.
- Exempt.
Identified Uses
Coatings and paints, thinners, paint removers. Widespread use leading to inclusion into/onto article (indoor). For use by appropriately trained applicators. Roller application or brushing. Low energy spreading of coatings.
Uses advised against
Any other use.
Manufacturers & Suppliers
Flowcrete UK Ltd.
manufacturer
The Flooring Technology Centre, Booth Lane, Moston, Sandbach, Cheshire. UK, CW11 3QF
+44 (0)1270 753000
http://www.flowcrete.co.uk
Emergency Contacts
CHEMTREC
+001 703 5273887
CHEMTREC
1-800-424-9300
Giftinformasjonen
+47 22 59 13 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No hazardous items exist
The text for CLP Hazard Statements shown above (if any) is given in Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention.
Wash off with soap and plenty of water.
Rinse thoroughly with plenty of water, also under the eyelids. Keep eye wide open while rinsing. Remove contact lenses.
Gently wipe or rinse the inside of the mouth with water. Give small amounts of water to drink. Never give anything by mouth to an unconscious person. If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon Dioxide, Dry Chemical, Foam, Water Fog
Alcohol, Alcohol based solutions, any other media not listed above.
No Information
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid dust formation. Use personal protective equipment.
No conditions to be specially mentioned.
Pick up and transfer to properly labelled containers. After cleaning, flush away traces with water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. Avoid dust formation. Protect from moisture. Wash hands before breaks and at the end of workday. Do not breathe dust. When using, do not eat, drink or smoke.
Keep tightly closed in a dry and cool place.
Wash hands before breaks and at the end of workday. When using, do not eat, drink or smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Protective gloves.
Eye wash bottle with pure water. Safety glasses with side-shields conforming to EN 166.
Effective dust mask.
Long sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No reactivity hazards known under normal storage and use conditions.
Hazardous polymerisation does not occur.
Avoid moisture.
No Information
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Flowshield LXP HD Filler C?
The signal word is no signal word.
What is the physical form of Flowshield LXP HD Filler C?
Flowshield LXP HD Filler C is a solid appearing as sand / granular . It has odorless odor.
What is Flowshield LXP HD Filler C used for?
Coatings and paints, thinners, paint removers. Widespread use leading to inclusion into/onto article (indoor). For use by appropriately trained applicators. Roller application or brushing. Low energy spreading of coatings.
What is the melting point of Flowshield LXP HD Filler C?
The melting point is Not determined and the boiling point is N.D. - N.D..