Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Flowshield LXP HD Base A
- Product Code
- FLOWSHIELD LXP HD BASE A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coatings and paints, thinners, paint removers. Manual activities involving hand contact. Widespread use leading to inclusion into/onto article (indoor). For use by appropriately trained applicators. Roller application or brushing. Low energy spreading of coatings.
Uses advised against
Home DIY applications, because of the health hazards and training required.
Manufacturers & Suppliers
Flowcrete Polska Sp. z o. o.
manufacturer
Ul. Marywilska 34, 03-228 Warszawa, Polska
+48 22 879 8907
http://www.flowcrete.com.pl/
Emergency Contacts
CHEMTREC
+1 703 5273887
Giftinformasjonen
+47 22 59 13 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Barium sulfate EC: 231-784-4 | 7727-43-7 | 25 - 50% | No |
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 2.5 - 10% | No |
| Reaction mass of 2-ethylpropane-1,3-diol and 5-ethyl-1,3-dioxane-5-methanol and propylidynetrimethanol. EC: 904-153-2 | --- | 1 - 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Use a mild soap if available. Wash off immediately with soap and plenty of water.
Rinse thoroughly with plenty of water, also under the eyelids. Remove contact lenses.
Gently wipe or rinse the inside of the mouth with water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon Dioxide, Dry Chemical, Foam, Water Fog
Alcohol, Alcohol based solutions, any other media not listed above.
Fire will produce dense black smoke containing hazardous combustion products (see section 10).
Keep containers and surroundings cool with water spray.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment. Keep people away from and upwind of spill/leak.
Do not allow material to contaminate ground water system. Prevent product from entering drains.
soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations (see section 13).
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Flowshield LXP HD Filler C
CAS: 14808-60-7
FLOWSHIELD LXP HD HARDENER B
---
Peran/Flowshield SL Part A
UFI: XYX0-K07J-U00D-P5M0
Sealapex Xpress Base and Catalyst
---
Flowprime LW Part B
UFI: R6D2-70Q0-K007-CYQ7
Excelfluid EPX
---
Intershield 300 Bronze Part A
---
Intershield 300 PART B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. Use only in well-ventilated areas. Handle in accordance with good industrial hygiene and safety practice.
Store at room temperature in the original container. Keep container closed when not in use. Store in a dry, well ventilated place away from sources of heat, ignition and direct sunlight.
Keep working clothes separately. Keep away from food, drink and animal feeding stuffs. When using, do not eat, drink or smoke. Wash hands and face before breaks and immediately after handling the product.
Store away from sources of heat and ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
As a rule, at least 5 air changes per hour are recommended at the workplace. Avoid contact with skin, eyes and clothing. Ensure adequate ventilation, especially in confined areas.
Protective gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Eye wash bottle with pure water. Safety goggles. Safety glasses with side-shields conforming to EN 166.
In case of insufficient ventilation wear suitable respiratory equipment.
Long sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No reactivity hazards known under normal storage and use conditions.
Hazardous polymerisation does not occur.
Avoid temperatures above 40 °C, direct sunlight and contact with sources of heat. Do not freeze.
No Information
Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Flowshield LXP HD Base A?
The signal word is no signal word.
What is the physical form of Flowshield LXP HD Base A?
Flowshield LXP HD Base A is a liquid appearing as not determined . It has characteristic odor.
What is Flowshield LXP HD Base A used for?
Coatings and paints, thinners, paint removers. Manual activities involving hand contact. Widespread use leading to inclusion into/onto article (indoor). For use by appropriately trained applicators. Roller application or brushing. Low energy spreading of coatings.
What is the melting point of Flowshield LXP HD Base A?
The melting point is Not determined and the boiling point is 156 - N.D. °C.